Gridfinity AirPod Pro Holder 2x2x2

This is designed to lay flat to fit my UpliftDesk Drawer. The bottom is very thin by design so that I could use a 2x2x2 container and have the pods sit slightly taller than the container. This version is not stackable and I gave this a bunch of wiggle room since I use and toss these around soo much.

You can tighten things up if you want the fit to be more snug. Or even add a side opening to be able to charge it in place. It's pretty simple to make this a 2x2x3 or 2x2x4 bin in Fusion. Fusion file attached.

**Print Settings**: [Filament Friday Extra Fast (0.28) Cura Profile](https://thangs.com/designer/CHEP/3d-model/Filament%20Friday%20Extra%20Fast%20%280.28%29%20Cura%20Profile-342747).

Gridfinity Chapstick Holder 1x1x3

I have OCD (Obsessive  Carmex Disorder). This keeps it tidy. This is a bit snug so take your debuting tool and slice each edge and you'll end up with a secure holder for standard size chapstick that wont fall out. You'll need to use a small amount of force to remove the stick from the bin. You can tweak it if you don't need it so secure (Fusion file attached).

**Print Settings**: [Filament Friday Extra Fast (0.28) Cura Profile](https://thangs.com/designer/CHEP/3d-model/Filament%20Friday%20Extra%20Fast%20%280.28%29%20Cura%20Profile-342747).

Gridfinity Lens Wipe Holder 2x2x3

Lens Wipe holder. Constantly use these to clean my glasses, iPhone/iPad, and 3d printing things.

**Print Settings**: [Filament Friday Extra Fast (0.28) Cura Profile](https://thangs.com/designer/CHEP/3d-model/Filament%20Friday%20Extra%20Fast%20%280.28%29%20Cura%20Profile-342747).

Lutron Pico remote Holder

This is a holder for the Lutron Pico Remote. Holds a single remote. Example pic is for the remote that controls automated Lutron shades.

Gridfinity Groove Ring Holder 1x2x3

Here's a ring holder for Groove or any kind of Silicone ring. This holds around 7 mens rings. I made the insert slightly undersized so that the rings are snug and will not fall out, even if you tip the bin over.

**Print Settings**: [Filament Friday Extra Fast (0.28) Cura Profile](https://thangs.com/designer/CHEP/3d-model/Filament%20Friday%20Extra%20Fast%20%280.28%29%20Cura%20Profile-342747).

Gridfinity Air Tag Holder 1x1x3

This holds two Apple Air Tags in a 1x1x3 bin. You can add more by scaling the bin units vertically.

**Print Settings**: [Filament Friday Extra Fast (0.28) Cura Profile](https://thangs.com/designer/CHEP/3d-model/Filament%20Friday%20Extra%20Fast%20%280.28%29%20Cura%20Profile-342747).  

Gridfinity Apple Pencil Tip Holder 1x1x1.

This is a simple 1x1x1 storage box for Apple Pencil Tips. Holds 9 tips.

I purposely did not make this stackable for my needs but I'll upload an additional version that makes the holes and platform deeper to allow stacking other bins on top.

azcoov

Achievements

Seedling

Voyager

Up and Coming