Cable Anchor for 2020 V-Slot

Creality.stl

HOUSE FOR CAT DIAMS LOW POLY -  Follow us: linktr.ee/catalpine

Cathouse Diams in 1 part.stl

Hero Me Documentation - Details.stl

Documentation Membership Details.stl

Creality K1 max tool holder Gridfinity 2x4

K1 max tool holder_.stl

Ender 3 Pro Logitech C270 Z-Axis Mount

Ender 3 Pro Logitech C270 Z-Axis Mount.STL

Logitech C920 and Amazon Blink Mini dual camera mount

Mount.STL

Toolbox Glue Add-on for Creality K1

Tool Box Add on for Creality K1.stl

Creality K1 gridfinity organizer

When trying to organize my workspace I discovered gridfinity. I was completely hooked and every millimeter of my desk and drawers is now lined with grids and boxes.

Derived from [Zack Freedman's](https://thangs.com/designer/ZackFreedman) parametric #Gridfinity modular workshop storage system

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](https://bit.ly/3E2NxnZ)

Safety clip (Clip de racor)

It is a safety clip for the pneumatic fitting or for a 4mm outer diameter quick connector for 3D printer.

The G-code is created with PrusaSlicer for Prusa mini with an ultra definition of 0.05 mm; but it can also be printed for Creatity and other printers that use Marlin, (if you have a glass bed with clamps, make sure before putting it on, to remove the front clamp on the left, to prevent the nozzle from colliding with it, when doing the first line of filament checking), since PrusaSlicer does it on the front of the hot bed, not like Cura, which does it on the left.

 

Il s'agit d'un clip de sécurité pour le raccord pneumatique ou pour un connecteur rapide de 4 mm de diamètre extérieur pour imprimante 3D. 

Le code G est créé avec PrusaSlicer pour Prusa mini avec une ultra définition de 0,05 mm ; mais il peut également imprimer pour Creatity et d'autres imprimantes qui utilisent Marlin, (si vous avez un lit en verre avec des pinces, assurez-vous avant de le mettre en place, que vous retirez la pince avant gauche, pour éviter que la buse n'entre en collision avec (lors de la vérification de la première rangée de filaments), puisque PrusaSlicer le fait sur le devant du lit chaud, pas comme Cura, qui le fait sur la gauche.

 

Se trata de un clip de seguridad para el racor neumático o para un conector rápido de 4 mm de diámetro exterior para impresora 3D. 

El código G está creado con PrusaSlicer para Prusa mini con una ultra definición de 0,05 mm; pero también se puede imprimir para Creatity y otras impresoras que usan Marlin, (si tienes una cama de cristal con abrazaderas, asegúrate antes de ponerla, de quitar la abrazadera frontal de la izquierda, para evitar que la boquilla choque con ella, al hacer la primera línea de comprobación de filamento), ya que PrusaSlicer lo hace en la parte frontal de la cama caliente, no como Cura, que lo hace en la izquierda.

Heart of Mars (Creality Cloud Tool).stl

This is a heart on the planet Mars to be made as a planet lamp. This was done with the Makers Tools on the Creality Cloud mobile app. Worked a treat to design, and as soon as I have time, it will be awesome to print out.
The print went well with no supports and just a brim on the base. I have tested with a torch for the image but have some LED bases ordered to light this up nicely and give it something to sit on.
Printed in Esun Fire Engine Red PLA+ until I ran out (stupid mistake on my part) and finished in Peak Green Esun PLA+ this has made for a weird looking lamp but I’m happy. Only thing I would suggest that I missed in slicing is the Z seam placement, I let it auto hide mine but it is all aligned ( albeit on the side) but it is still a bit annoying.
A cool print regardless and will be fun in my sons Galaxy themed room I hope someone else gets some joy from this. Original at https://www.crealitycloud.com/model-detail/65350fd9f9b64ae4d5a05224
Print took just over 6 hours on the K1 with default settings, took around 154g of filament and was click and go.


Pen Holder (Creality Cloud Tool)


This was a quick test of the built-in maker tool and Slicer for this simple (not so simple) pen holder. start to finish was to try out the capacity of the maker tool on the phone, which worked a treat, and while fast, responsive, and easy to use allowed me to make something to a reasonably high standard. The built in Slicer on the mobile app worked the same as my PC with the default settings on a K1 it printed in 2h 50m with a filament change a few layers in when I ran out of white. There was some minor wisping of the new filament but completely untouched non Creality filament printed very well. There is some ghosting in this part due to the speed of the k1 and some known of firmware bugs, but for literally plug and play from a mobile you couldn't ask for much easier or better of a result in my opinion. This is well worth a print imo and is something I'm sure I'll make more of in future.
Originally hosted at https://www.crealitycloud.com/model-detail/652e5a6206d6cf3ae6afd1b0
all properties used are and remain property of Creality.


E5 Panel Insert.stl

Replica of the extrusion inserts that came with the Creality Ender-5 S1 Pro acrylic panel kit.

I lost some and figured there's a chance others may suffer the same fate. 

I recommend printing in orientation pictured (and should be model's default). Small amount of support required for the underside of the prong (see picture). Only minor bridging required without.

Print pictured was printed with a 0.4mm nozzle, probably would be fine with 0.6mm too.

If you have also lost the square nut a normal M5 hex nut should fit too. That's what I used.

Creality Ender 3 pro Main board case with bigger hole for Noctua fan.obj

Main board cover with hole to fit the totally worth bigger and far more silent Noctua NF-A8 FLX fan.

Main board case with hole for Noctua NF-A8 FLX fan.obj

O3D Hotbed PCB holder and cover

Hetbed boks.stl

Power Switch and intake stick 

Power Switch and intake stick.stl

Creality K1 max glass lid and spool holder.

K1 max Glass lid holder 1.stl

Filament Roll Extruder Knob - Ender 3

Filament_Roll_Mid_Section.stl

K1 bed level test

Can also be used on other printers with a print bed of 300mm x 300mm.
Support me by joining my membership plan.

3D Printer Doorbell Mount Mod

Mount Extended.stl

FY-11 Digital Humidity /Temp. meter magnet mount

FY-11 is a Digital Humidity and Temperature panel meter. It is compact and cheap. Can be used anywhere. 

It's designed as a panel meter. So mounting is a bit challenging. To solve the problem I designed this magnetic mount which uses 6x3mm neodymium magnets or can be even be screw mounted after clearing the sacrificial layer of 0.2mm.

Material - Any
Layer height - 0.2

creality

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cable Anchor for 2020 V-Slot

HOUSE FOR CAT DIAMS LOW POLY - Follow us: linktr.ee/catalpine

Hero Me Documentation - Details.stl

Creality K1 max tool holder Gridfinity 2x4

Ender 3 Pro Logitech C270 Z-Axis Mount

Logitech C920 and Amazon Blink Mini dual camera mount

Toolbox Glue Add-on for Creality K1

Creality K1 gridfinity organizer

Safety clip (Clip de racor)

Heart of Mars (Creality Cloud Tool).stl

Pen Holder (Creality Cloud Tool)

E5 Panel Insert.stl

Creality Ender 3 pro Main board case with bigger hole for Noctua fan.obj

O3D Hotbed PCB holder and cover

Power Switch and intake stick

Creality K1 max glass lid and spool holder.

Filament Roll Extruder Knob - Ender 3

K1 bed level test

View 21 new models

FY-11 Digital Humidity /Temp. meter magnet mount