This was a quick test of the built-in maker tool and Slicer for this simple (not so simple) pen holder. start to finish was to try out the capacity of the maker tool on the phone, which worked a treat, and while fast, responsive, and easy to use allowed me to make something to a reasonably high standard. The built in Slicer on the mobile app worked the same as my PC with the default settings on a K1 it printed in 2h 50m with a filament change a few layers in when I ran out of white. There was some minor wisping of the new filament but completely untouched non Creality filament printed very well. There is some ghosting in this part due to the speed of the k1 and some known of firmware bugs, but for literally plug and play from a mobile you couldn't ask for much easier or better of a result in my opinion. This is well worth a print imo and is something I'm sure I'll make more of in future. Originally hosted at https://www.crealitycloud.com/model-detail/652e5a6206d6cf3ae6afd1b0 all properties used are and remain property of Creality.