Add a bit of sophistication to your workspace with this fluted column trash can.

This stylish and compact design helps keep your desk clutter-free. The flip lid opens smoothly and is print in place.

Sleek fluted column design
Two Parts: Main and Cover/Lid
Convenient lid is print in place
Easy to print and assemble

You could probably size this up or down a small amount, but that will change the size of the "hinge" part.  If you need this done in a different size, please let me know and I'll do my best to help.  I can change the overall size or the size and quantity of the flutes.

Fluted Column Mini Trash Can

Main Trash Can.stl

Robin Hood's toothpick holder is here!  There's room for 35 toothpicks and two small notches in the target help keep it in place.

I printed mine in 4 colors, but I think it would be just fine in 1 color.  It looks best if you can face the toothpick holes down on your build plate.  The stand is print in place.

The diameter of the toothpick holes are 2.85mm.  Leave a comment if you need the holes in a different size or shape and I'll do my best to help.  

Target Toothpick Holder

Toothpick Target.stl

Medieval inspiration for your desk. This pen holder adds a little castle charm to your workspace.  Your pens reside safely in the two towers ready to guard against blank paper and writer's block.

Castle Gate Pen Holder

Castle Tower Gate Pen Holder.stl

This planter has decent sized drainage holes.  There is also a version with no drainage.  The bottom is tapered which helps a bit with my nemesis, the "benchy hull line".

Geometric Planter

Geometric Planter.stl

This is another version of the sun box I made for my aunt.  If you think the lid looks a bit too busy, there is another plain lid you can use. 

The other version is here:  than.gs/m/1041940

Let me know which one you prefer.

Another Round Sun Box

Round Box Small Sun.stl

This stone town well is printed in 4 parts.  If you print the posts in the oriented position, they should be a pretty tight fit with the stone well part.  You may need a little sandpaper if they are too tight.  If they are too loose, a little glue will help.  The canopy has small notches where the posts go.  You will be able to lift it off, but I got mine to stick with a bit of glue.

I've provided a version with the posts attached to the stone part if you want to do a filament change.  Supports are optional on that one, but there is some bridging.  If you are a total rebel, there is also a full version that will require supports.

If you need the posts done with different tolerances, please let me know and I'll get right on it.

Let me know what you think of it or if there is anything I could improve.  I look forward to seeing some makes!

Stone Town Well

Stone Well.stl

My aunt asked me to make a box for her.  I made two versions.  The other one is here:  than.gs/m/1042084

Which one do you prefer?

Round Sun Box

Round Box Large Sun.stl

A stash container fit for a king!  This oversized chess piece isn't just for show.  It has a small hidden compartment too.   You can also print this without the stash compartment.  

I printed mine with .20 layer height up to the crown.  Around 107.6mm (on the stash version), I switched to .16 layer height.  If you line up the seams in the same position in your slicer, they should be fairly close to each other when the base is fully closed. 

I was torn on the perfect name for this model.  What do you prefer?  “King's Cache” or “King's Stash”?

King Chess Piece Stash Container (stash portion optional)

Chess King Stash.stl

This barrel pen holder is wider than the last one I did.  I usually print these with 3 walls, just to give it a little extra weight.  Two walls are fine though.

Another Barrel Pen Holder / Pen Cup

Barrel Pen Holder (4 rings).stl

Tired of the same old stash containers?  Take the plunge and give this mini plunger a whirl!  I know, I know... it's a little goofy and it won't actually unclog anything.  But I had fun making it and I hope you have fun with it too.

This 3-piece mini plunger features a threaded design for easy assembly, transforming into the ultimate stash container.  The main body and bottom are hollow.  I have also included a solid bottom in case you are getting a "benchy hull line" on the hollow one.

Print settings I used:
- 2 walls on main body and bottom
- 3 walls on handle (since lighter colors can show infill near a light source)
- 15% infill
- Set seam to back, except for the handle.  See the 3MF files for my seam painting on the handle.  Adjust settings for your own printer if using the 3MF files.  You can open these 3MF files with Orca Slicer or Bambu Studio.  
- Brim on handle only, but not actually required.  I printed without a brim because I didn't want to remove it around threads.

Depending on your printer, filament, and settings, the top 2/3 of the main body may appear glossy.  You can avoid this by slowing down your print.  Here is a great video by 3D Print Stuff that talks about this: https://www.youtube.com/watch?v=J_pxk7HP3RE

Please reach out if you need any help with it.  Enjoy!

Mini Plunger Stash Container

Main Body.stl

Here is another pen and pencil holder for your desk.

The marble tower pictured was printed with Polymaker Polyterra Marble Slate Gray PLA.  It seemed like the perfect model for this filament. 

Castle Tower Pen Holder / Pen Cup

Castle Tower Pen Holder.stl

This barrel-shaped pen holder will make a great addition to any desk.  I usually print with 3 walls for a little extra weight, but 2 walls is fine.

The gray cup was printed with light gray CC3D PLA Max filament and I hope to have the time to paint it some day.  The blue cup is Elegoo PLA.

I made another barrel pen holder with a different style here:  https://than.gs/m/1027456





Barrel Pen Holder / Pen Cup

Barrel Pen Holder (6 Rings).stl

Just wanted to say thank you! My models have now been downloaded over 500 times - that's amazing! This week I added a target-shaped toothpick holder. I'm pretty happy with how it turned out, but what do you think? Click <a rel="noreferrer" href="https://than.gs/m/1050565">here</a> to check it out!If you ever need a model changed or improved (like the size of the toothpick holes), I will do my best to help. Thanks again, your support is truly appreciated!- Luke

 Just wanted to say thank you!  My models have now been downloaded over 500 times - that's amazing!   This week I added a target-shaped toothpick holder.  I'm pretty happy with how it turned out, but what do you think?  Click here to check it out! If you ever need a model changed or improved (like t

500 Downloads!

Cover Trash Can.stl

I love 3D printing and I love growing tomatoes.  

My ever-expanding collection of 3D printers includes my first Ender 3.  It's been with me since 2019 and I don't think I could ever get rid of it.  Things have come a long way since then.

Need one of my models modified?  Let me know and I'll do my best to help!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown">I love 3D printing and I love growing tomatoes.
My ever-expanding collection of 3D printers includes my first Ender 3. It&#x27;s been with me since 2019 and I don&#x27;t think I could ever get rid of it. Things have come a long way since then.
Need one of my models modified? Let me know and I&#x27;ll do my best to help!</div>

Crunch3D

Designer posts

500 Downloads!

Pinned models

Fluted Column Mini Trash Can

Fluted Column Mini Trash Can

Target Toothpick Holder

Castle Gate Pen Holder

Geometric Planter

Another Round Sun Box

Stone Town Well

Round Sun Box

King Chess Piece Stash Container (stash portion optional)

Another Barrel Pen Holder / Pen Cup

Mini Plunger Stash Container

Castle Tower Pen Holder / Pen Cup

Barrel Pen Holder / Pen Cup