HOUSE FOR CAT DIAMS LOW POLY - Follow us: linktr.ee/catalpine

Shaped like a diamond, this cat house is designed by designers to give your pet its own cosy nest, providing comfort and security during the long hours of rest it needs.

The primary aim of this kennel is to become a real decorative element for your home that will meet your pet's needs.

To print this cat house to scale 1 in one go, you can use a large printer like the 400 x 400 x 400 mm.

If you don't have a large-format printer, you can also print it in several parts using a 200 x 200 x 200 mm printer, and assemble them using connectors and glue.

At scale 1, the dimensions are suitable for a small cat. If your cat is bigger you can, of course, increase the scale.

The design is protected by copyright. Downloaded files may only be used for personal use.

Other Catalpine models are also downloadable on: https://cults3d.com/en/users/Catalpine

3D printing setting This cat house can be printed in one piece or in several parts, depending on the size of the printer you use.

At scale 1, the dimensions are: X39 x Y39 x Z30 cm.

We get a good printinting with these parameters: -0.4 mm nozzle, -layer height 0.2 mm, -wall thickness 0.8 mm, -top/bottom thickness 0.8 mm, -filling density 6%, -no support. To improve the finish, I suggest aligning the Z seam to an edge

For best rendering and assembly accuracy, we recommand to print the parts in the same position as on the STL file supplied.