Top mount Filament Sensor - fits Kobra Max and others

Kobra Max Top Mount Sensor Bracket.stl

NEMA 17 Bracket

Has two holes for m5 screws that can be used to attach the bracket to V-Slot bar, using T nuts.

2-Way Parametric Shelf Bracket

This is a Parametric Shelf Bracket that can be used in either a classic underneath the shelf style or as an over the shelf hanging down style bracket (see pics). The parameters that can be accessed in Fusion 360 are:

Board Thickness: How thick is the board you plan to put in the slot for use in the 'over' style. A lumber yard 1x6 will measure approximately 18.5mm by 140mm due to sanding and facing losses. Enter 19mm in this case for a snug fit around a 1x6.

Board Width: As above a 1x6 will measure approximately 140mm wide. A 1x8 would be 191mm etc. The supplied model fits a standard 1x6 at 140mm. 

Bracket Thickness: How thick do you want the perimeters of the bracket to be? I've chosen 5mm which works well. This measurement drives some other measurements  so tinker at your own risk.

Bracket Height: The length of the "other side" of the bracket when used as an overhanging bracket. Ideally this should be as close to the width of the board as possible given the available height of the bracket. 120mm for a 1x6 is a nice compromise for using in both directions. 

Please enjoy!

Shelves Brackets

shelf for bags p1.stl

 Intel Pro 1000 4 Port Full Height Bracket 

 Short Story Time. Had this card with a low profile bracket....didn't want to buy a full length bracket. 

The PCI-E Bracket is for the Intel Pro/1000 4 Port Ethernet card

This bracket is strong enough to plug and pull. Printing with PLA is fine, if you print in another material let me know please, would love to hear the results. 

Instructions to print 

    You must generate supports! If you are using Cura I recommend setting your print settings to advanced. 

    Support structure must be Tree
    Touching build plate
    the rest of the settings are up to you for supports (default worked for me)
    infill was set to 20% but that is only a recommendation*

    Let me and everyone know if any settings have better results.
    the hole is for a M3 insert. It is not entirely necessary to be screwed in but recommended 

Anycubic Mega X LED Strip Mounting Brackets

RGB mount6.stl

Traxxas TRX-4m Suspension Spacer 3.6mm

Suspension Clip.stl

alice in wonderland bracket

alice in wonderland bracket.3mf

Nozzle cam bracket Ender 3 S1.stl

nozzle cam lid.stl

VESA Mount Adapter 200x200 to 200x400

vesa_200_to_400_bracket.stl

Shelf mount OR Box Holder

I made this little thang to hold up a small shelf I was working on in the woodshop.


Aqara Presence Multi-Sensor FP300 Mount

Aqara FP300 Mount.3MF

U Bracket

U Bracket.3mf

Direct drive Extruder bracket (Ender 3 v2 neo)

Direct drive Extruder bracket v3.stl

Creality E-Fit Cable Housing

I designed this to fit the Creality E-Fit direct drive extruder upgrade.

This fits over the top, keeping the hot end wires and fan wires stationary while the X axis moves. A zip tie slot at the top secures the cables in position.

I printed in resin because of the awkward dimensions but you may be able to make an FDM version.

bracket

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Top mount Filament Sensor - fits Kobra Max and others

NEMA 17 Bracket

2-Way Parametric Shelf Bracket

Shelves Brackets

Intel Pro 1000 4 Port Full Height Bracket

Anycubic Mega X LED Strip Mounting Brackets

Traxxas TRX-4m Suspension Spacer 3.6mm

alice in wonderland bracket

Nozzle cam bracket Ender 3 S1.stl

VESA Mount Adapter 200x200 to 200x400

Shelf mount OR Box Holder

Aqara Presence Multi-Sensor FP300 Mount

U Bracket

Direct drive Extruder bracket (Ender 3 v2 neo)

Creality E-Fit Cable Housing

ClosetMaid, Shelf Bracket Hook

Angled Dowel Rod Bracket

Gearfinity Handle Plate Bracket

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

Freezer Handle Bracket (GE REPAIR/UPGRADE)