Mushroom lamp “Amanita Muscaria”

Stem.stl

SNOOVA table organizer I pen holder

3.stl

Collapsing Dice Tower

This dice tower prints-in-place in the retracted position with no supports but after printing it extends to three times its original height. The drawbridge opens to allow the dice through, but a detent keeps it closed when traveling.  The funnel on top and the angle on the bottom mixes the die and makes sure they exit the tower every roll. There is a button on the bottom that locks the tower in position so it wont accidently extended. There is compartment on the bottom for storing dies with a built in catch on the lid.

It is designed to be printed with a .4mm nozzle. The walls are four shells thick, two shells are used for the brick inlay.

Note: if your tower does not extend all the way, pull it apart until you have the desired extension and leave it for a day or two. The plastic will eventually "creep" and you'll get the perfect fit.
Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)

Mushroom lamp “Morchella Esculenta”

Head_big.stl

Cube wave - a side table

Cube wave.3mf

Citrus clock

Citrus_clock.3mf

Garlic night light "Gary"

All.3mf

Mushroom lamp “Boletus Edulis”

Base_screw_socket.stl

Mushroom vase “Gleophyllum Abietinum”

**A unique vase for flowers.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 168 x 165 x 216 mm – has a wall thickness of 2 mm
- Smaller (80%): 134 x 132 x 173 mm – has a wall thickness of 1.6 mm
- Minimum size (60%):  100 x 99 x 130 mm – has a wall thickness of 1.2 mm
- Everything smaller than that is not tested but probably possible

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 270g
Print time: (100% scale): 22h

Material usage (80% scale):160g
Print time: (80% scale): 13h

Material usage (60% scale): 80g
Print time: (60% scale): 7h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram


Vase “abietinum fungus”

TELA  |  Table lamp E14 & E27 & E26 fast print

TELA_table-lamp-Shade.stl

Eagle - Wall Decoration

EAgle.stl

Lamp “Bonbon”

Bonbon_desk.3mf

Tippi Tree Stacking Game

Take turns stacking Leaves on top of your **Tippi Tree**, but don't let it topple! The aim of the game is simple, but you'll find that every round can offer new challenges and surprises. This stacking game features a unique S-shaped Leaf piece that connects to other Leaves in over 60 different ways, so every Tippi Tree grows differently. That makes this game fun and challenging for anyone from age 6 to 106. Great for parties, family nights, desk distractions, and a fantastic gift! 

---
 

**Tippi Tree** is an original game designed for 3D printing. Easy to PRINT & PLAY!

---

This download includes all the parts necessary to build your Tippi Trees:

- Tippi Tree

- Branch

- Tall Trunk

- Short Trunk

- Leaf

Plus bonus parts:

- Test piece

- Tiny Tippi Tree

- Alternate Styles (Blocky and Dual)

- Printable Logo!

- **& MANY MORE** (see updates below)

 

You'll also get PDF instructions for printing and playing:

- Game Manual (printable PDF color and B&W) 

- Printing Guide (printable PDF color and B&W)

I hope you find these instructions thorough and enjoyable! 

 
---

**_General Printing Instructions_**

- All parts print at 11% infill, 2-3 shells, 5 top and bottom layers with a standard 0.4mm nozzle. No supports required.

- PLA suggested but not required. Photos show leaves printed with [MatterHackers PRO PLA](https://bit.ly/PRO-PLA)

- For more details + troubleshooting, please refer to the included Printing Guide


---

**_Update History_**

**Dec 14 2020 Update:**

- Added Tiny Leaf V2 that fits way better than the original
- Added Game Manual translations for German, Spanish, and Italian (thanks Marcel F., Valentín G, and Giovanni L. for volunteer translations)

**February 10 2021 Update:**

- Added Tiki Tree Skin (based on winning competition entry by Jen Day and Bill Drastel)
- Added Leaky Hydrant Skin (based on winning competition entry by René von Koolwijk)
- Added Birds & Berries
- Added Experimental Leaves, Trunks, Branches
- Added Split Tippi Tree Base
- Added Tipmas Tree Puzzle
- Added Belt Printer Version for Leaf (no chamfer on leading edge)
- Added Game Manual translations for Swedish and French (thanks to Thomas H, and Jules S for volunteer translations)
- Removed square version of the manual and printing guide to simplify things

**October 26 2021 Update:**

- Improved fit of Tiny Branch models

**November 30 2021 Update:**

- Added 'Split Tree' version of the Tiki Tree [~/02.Printing Files/02.Extras/05.Tree Skins/01.Tiki Tree (Concept by Jen Day and Bill Drastal)/Tiki Tree_Split Tree Version.stl]

**May 07 2022 Update:**

- Added 'Tiny Berry' files [~/02.Printing Files/02. Extras/02.Tiny/Tiny Berry/...]
More birds! Added Baby Bird, Bluebird, Cockatoo, Finch, and Sparrow [~/02.Printing Files/02.Extras/06.Bonus Bits/01.Birds/...]
**July 25 2022 Update:**

- Added split version of Tiny Tree [~/02.Printing Files/02.Extras/02.Tiny/Tiny_Tree_Split_A.stl + _B.stl]

Table

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mushroom lamp “Amanita Muscaria”

SNOOVA table organizer I pen holder

Collapsing Dice Tower

Mushroom lamp “Morchella Esculenta”

Cube wave - a side table

Citrus clock

Garlic night light "Gary"

Mushroom lamp “Boletus Edulis”

Mushroom vase “Gleophyllum Abietinum”

TELA | Table lamp E14 & E27 & E26 fast print

Eagle - Wall Decoration

Lamp “Bonbon”

Tippi Tree Stacking Game

Marshmallow table

Pineapple coasters

Lamp “Waterdrop”

Otter With Heart Candle Holder / Multiparts & Multicolor

Banana lamp

Mushroom lamp “Boletus Edulis” parametric

CALIZ | Woven Table Lamp E14 & E26/27