Google Pixel 6A TPU BEEFCASE // MOO

6A_moo_B.stl

Squat Rack Safety and J Hook TPU Caps

Safety Bar Knee Saver.stl

Google Pixel 6A TPU BEEFCASE // Blank

6A_blank.stl

Cable Entry Seal

This is a 30mm long bushing (meant to be printed in TPU or flexible filament). The center diameter is 5mm and the outside diameter is 24mm. This is a perfect solution to plug the large holes required for Amcrest, Dahua, Hikvision, Uniview, and other manufacturers which use a water resistant cable cover assembly.

Drill your hole, insert everything, then feed this bushing onto the cable and stuff it into the hole. The bushing is slightly larger than a 7/8" drill hole (the size required to fit a cable head cover). As you fit it into the hole, it will squeeze the cable as well and seal up.

Dust Blower Vase mode TPU/Flexible

Shelled dust blower.stl

Snapmaker 2.0 TPU Clamp (for laser engraving & cutting)

Here is a simple part that I found to drastically improve my experience with the Snapmaker 2.0 laser module. Print in TPU to give the flex required to press fit into the laser bad and stay there. 

Unfortunately it seems like the other Snapmaker machines have different bed designs, so these might only work for the Snapmaker 2.0 models (350/250/A350T/A250T/F350/F250)

RodholderTPUOTG.stl

I needed a holder for my fishingrods when I´m on the go. Print with TPU.

Flexispot E7 Desk TPU Foot Covers

Slip on TPU covers for the foot pads on my [FlexiSpot E7 desk](https://bit.ly/FlexiSp). 61.25mm inner diameter, so you can do the math to scale this for different uses as well :)

68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

Soft Dinos

Stego.stl

Logitech MX Anywhere 2S grips

textured2.stl

Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata

Mini fan blade

i printed it in tpu 2mm walls and 2mm top battom layers 
You can see it here https://youtu.be/1beirbIG4dg

Monster Energy Cover

you need to print it in tpu , otherwise you will need to scale it up maybe 1 or 2 precent with pla to fit a normal can

TPU Stickfigure - TPU Test Print

This print is a good way to test your TPU. After the stickman prints, you can color in the eyes to give it some pop. Or you can change the filament when it gets to the eyes.

Spray can straw holder

Squirt Prank Ring (Separated Version)

Squirt Prank Ring Separate - Ring 20mm.stl

The Fart Accordion Pha(r)t Edition

The bigger, longer and thicker version of [The Fart Accordion](https://than.gs/m/839352) for 57% more fun!

Depending on the size of your sausage shovels, this might be easier and sexier to play than the normal edition. Uses a bit more TPU of course (18,5g vs. 12g) but maybe it's worth it?

Check out the video of how it plays: https://youtu.be/JqhNWHeMRQU

TPU Bed Screw Washers

Drop these washers between the bed screw and bed. Print with TPU for some grip. This will stop your screws from spinning without using glue/epoxy or making the surfaces rough with sand paper.

Print at 0.4 height with an 0.8 nozzle and these will be done in seconds.

TPU

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Google Pixel 6A TPU BEEFCASE // MOO

Squat Rack Safety and J Hook TPU Caps

View 17 new models

Cable Entry Seal

Dust Blower Vase mode TPU/Flexible

View 21 new models

RodholderTPUOTG.stl

View 66 new models

View 111 new models

Soft Dinos

Logitech MX Anywhere 2S grips

Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata

Mini fan blade

Monster Energy Cover

View 11 new models

View 10 new models

Squirt Prank Ring (Separated Version)

The Fart Accordion Pha(r)t Edition

TPU Bed Screw Washers

Insta360 ONE R - 1 inch no battery case