Tiny Spider Apple

CW3D Tiny Spider Apple.stl

Planetary Quick Container

**Planetary Quick Container**

When you hold the middle section on this container and turn the bottom section, it opens up quickly due to the planetary gears on the bottom.

**How it works**
The bottom outside is the ring gear, the outer top part is the carrier, and the inner part is the sun gear.  Rotating the bottom segment while holding the top segment results in the planetary gears rotating inner shell at a 3:1 ratio.  

**Print instructions**
It’s designed for a .4mm nozzle, .2mm layer heights, no supports at 100% but there is some bridging.  There is a 6mm hex hole in the sun gear to free up the gears if necessary.

**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed.

Printed on the [Muldex]( https://github.com/3dprintingworld/Mulcore) Core-XY 3D Printer. 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Mace Windu Collapsing Lightsaber

**Mace Windu Collapsing Lightsaber**
_Print-in-Place Version_

This lightsaber prints complete all as one piece. 

The Removable Blade Version is available to my [Patrons.](https://www.patreon.com/3dprintingworld)

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on [how to print collapsing swords](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) on my website. If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


PLEIADES Round Waste Bin

Lid.stl

Tiny Star Cookie Dragon and Wyvern

Star Cookie Tiny Wyvern.stl

Baby Dumpling Dragon

CW3D Baby Dumpling Dragon Clicker Tail.stl

Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Print-in-place

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tiny Spider Apple

Planetary Quick Container

Mace Windu Collapsing Lightsaber

PLEIADES Round Waste Bin

Tiny Star Cookie Dragon and Wyvern

Baby Dumpling Dragon

Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

German Shepherd - Hatchling

Candy Corn Dragon

Print-in-Place Bag Clip

Tiny Easter Cookie Wyvern and Dragon

Obi-Wan’s Third Collapsing Lightsaber

Tome Keychain Stash Container

Auxetic Cubes // 20mm 3x3 rounded Fidget Toy

Pug - Hatchling

Articulated Coatl Dragon by Mesh Mayhem

Rottweiler - Hatchling

Print-in-Place Rising Box

Dumpling Dragon

Another Infinity Cube