potlidholder.stl

 Swirl Sphere Plant Pot, Vase Mode & Shelled 

SWRL1, SWIRL SPHERE PLANTER (shell) BY SLIMPRINT.stl

Face Pot

Pot with a minimalist face design.
Scale to size and print with preferred settings.

quilted vase

hexo pen holder

walls are 2.8mm thick to make printing as easy and fast as possible for .4 & .8 nozzle sizes

Moonwell

Gracewindale-moonwell.stl

Teardrop Pod (FCC Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice:
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Spiral Vase (aka: Sneaky Holder)

Main Vase.obj

Cat with Bowl

At its current size, it can hold a small air plant but can be sized up to hold a larger plant or other items! Easy to print with no supports needed!

Domed Heart Screw-close Box

Domed Heart Top.stl

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Castleplanter.stl

Cat Pot

Plant label

body_regular.stl

Stone Pot

stone effect pot/vase to be printed in vase/spiralise mode

Mirror Plant Stand / Table (Core Setup) - part of the Reflection Stand System

Full Model

Dog pot

Preview.stl

Cat Pot Lid.stl

flower pot.stl

Hanging Robert plant pot.stl

**NOT MY MODEL**
**SUPPORTS REQUIRED**

the original creator is ELIBENITEZ74 from cults 3D. I recently needed this model and struggled to find it on here so here it is so that no one struggles like I did. this is the perfect gift for mothers day or any birthday. any special occasion really. 
Remember to like and subscribe! just kidding (but really, it does help me out.)
and as always, have fun!

growing pot .stl

POT

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 14 new models

Swirl Sphere Plant Pot, Vase Mode & Shelled

Face Pot

quilted vase

hexo pen holder

View 143 new models

Teardrop Pod (FCC Lattice)

View 15 new models

Cat with Bowl

View 17 new models

Planter castle

Cat Pot

View 31 new models

Stone Pot

View 10 new models

Dog pot

Cat Pot

View 11 new models

View 11 new models

growing pot .stl