Creality CR6-SE Filament Guide - Supports.stl

Filament guide designed for the Creality CR6-SE that fits on top of the filament sensor.

Designed with the guide pointing down, which unfortunately means it needs to be printed with supports.

Weirs Beach Sign (HO Scale?)

Stackable StorageDrawers

Vase mode gear tool holder

An 8 tooth involute gear shaped tool caddy for printing in vase/spiralize mode.

This might look like just a really thick solid spur gear, but on closer examination of the top you'll see it has lots of thin slots that result in a continuous outer wall that snakes in and out of the model. When printed in vase mode, the outside of the walls adjacent to each other along the slots fuse together (see close up picture) and reveal 13 compartments. 5 larger ones in the hub and 8 smaller tooth compartments.

Dimensions:
- diameter: 150mm
- height: 100mm
- base: 0.6mm thick before the slots start

Compartments
- center: 1x 38mm round
- outer hub: 4x roughly 30mm x 60mm
- teeth: 8x about 20mm around (perfect for plier handles and long thin tools)

Printing:
- Use vase/spiralize mode with typical settings.
- **IMPORTANT**: Make sure you have enough bottom layers (3 @ 0.2mm layer height) to make up the base and preview your slicing to check that the wall starts on top of the last base layer. *More* base layers won't hurt.

Vase mode gear tool caddy

Yellow Tuk-Tuk/ Auto Rickshaw with Movements

Automatic nozzle brush cleaner for Artillery Sidewinder X2

Every day carry tray

Spiral vase

Alternate AnkerMake M5C Filament Guide

I ran the printer for a while without the filament guide, and when retracting, it made the spool bounce around a little more than I was comfortable with. I built this as an alternative to the top guide provided with the printer. You can print this guide with PLA or any other filament and with no supports needed. Reuse the clips from the guide provided with the printer sliding the tubing from the top toward the build plate.

 Card Filament spool liner S5

card spool inner.STL

CR2032 Led Light Base

Classical table lamp

Articulating lamp parts

Cat Lamp

Bearing Slide for Half Height Uni-Strut

3D Printed Self-Assembling Cells

Do Not Print.stl

Ultimate 3D Printed Can Cap with Handle – Flip-Top Lid That Locks Open

Can caP V2.3mf

Paint it Black

Rock Lee Manga Panel - Naruto - made w/ HueForge

Yellow Road Roller Modern with Movements

Office Supplies

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Creality CR6-SE Filament Guide - Supports.stl

Weirs Beach Sign (HO Scale?)

Stackable StorageDrawers

Vase mode gear tool holder

Yellow Tuk-Tuk/ Auto Rickshaw with Movements

Automatic nozzle brush cleaner for Artillery Sidewinder X2

Every day carry tray

Spiral vase

Alternate AnkerMake M5C Filament Guide

Card Filament spool liner S5

CR2032 Led Light Base

Classical table lamp

Articulating lamp parts

Cat Lamp

Bearing Slide for Half Height Uni-Strut

3D Printed Self-Assembling Cells

Ultimate 3D Printed Can Cap with Handle – Flip-Top Lid That Locks Open

Paint it Black

Rock Lee Manga Panel - Naruto - made w/ HueForge

Yellow Road Roller Modern with Movements