Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5848492.

Modelled for Cherry MX switches.
 
Print with low speed for best results. 

No supports needed!

*For best lightup effect:*

I. Print with white / clear filament
II. Paint outer layer and top layer

     or

I. Print first few layers with black filament
II. Print rest with white / clear filament
III. Paint sides or keep as is


Escape key

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5722923.

Sten MK II (Stengun) modelled in Autodesk Inventor for display/prop purposes. (no moving parts)

Printed at 160%
Picture showing recommended  printing orientation. 
Supports only needed for bottom of barrel part.

Full size length: 762 mm
Modell length 225.4 mm

Scale for lifesize would be 338%



Sten MK II

Full_assembly.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5819745.

Disk magnets: 8 pieces, Ø8mm x 2mm
Printed with 0.4mm nozzle and 0.2mm layer height on ender 3-pro
Tip: Use “Octagram Spiral” on Prusa slicer as bottom fill pattern on lid for unique effect 


Digital Caliper Case - Magnetic

Bracket for extra shelf on the IKEA LACK table.

IKEA LACK Shelf bracket

AA battery holder in magazine style, functioning springfed holder that fits +/- 10 AA batteries.

Link to AAA version: https://www.thingiverse.com/thing:5437849

Magazine Battery Holder (AA)

Magazine.obj

Tree trunk printed using spiral vase mode on prusa slicer.

For cura slicer: Special modes -> Spiralize outer contour

Hole diameter 70mm (2.75")

Height 65mm (2.36")

Model in contest "Vase mode vases" on printables.com:

https://www.printables.com/model/287743-tree-trunk-vase-mode

Tree trunk planter (Vasemode)

Printed using spiral vase mode on prusa slicer.

For cura slicer: Special modes -> Spiralize outer contour

Model in contest "Vase mode vases" on printables.com:

https://www.printables.com/model/286314-dragon-egg-vase

Dragon egg vase

Hexagonal Organizers

Hexagonal_organizer_big_v4_White.obj

Spiral vase printed using spiral vase mode on prusa slicer. For cura slicer: Special modes -> Spiralize outer contour

Spiral vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5391413.

Smartphone stand/holder, vertical and horizontal. 

Pictures depicting iPhone 12 (with case) in use of stand/holder.

Best printed on side, requires no supports, recommended infill around 15%.

360° Animation: https://www.youtube.com/shorts/Q0iSQ7jQTF4 

Smartphone stand/holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5437849.

AAA battery holder in magazine style, functioning springfed holder that fits +/- 10 AAA batteries.

Link to AA version: https://www.thingiverse.com/thing:5463356



*SCALING*
If you have problems with scaling using .STL files, scaling to 1000% (on cura) seems to work.
Using .OBJ files does not need any scaling.

Magazine Battery holder (AAA)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Jallim