Milky Way Desk lamp

Greetings!

I'm excited to present you with my Milky Way Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, i designed this lamp specifically for this lamp socked ton ebay. You can make your own version, it just involves more effort because the parts might not fit.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Milky Way: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Milky Way part, you'll need to print the holder with supports.

Voila! Your Milky Way Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Milky Way Desk Lamp!
#FunctionalArt

IKEA PAX ÖVERSIDAN light sensor cover

ÖVERSIDAN wardrobe light strip has a sensor that switches the light on and off automatically when you open or close the door. It also has a switch but it's a really tinny one and it's not comfortably placed for frequent use.

I keep my 3D printer in a PAX rack with these light strips and I like to have the door open when I'm printing. I created this part to easily turn off the light for long prints.

Lamp shade.3mf

 3D model of a Lamp Shade. Featuring an intricate pattern, this digital lamp shade communicates a captivating radiation of light, enhancing a room's aesthetics splendidly. Meant to be used primarily for lamps with excellent rigidity and heat resistance, the model can be reproduced using a 3D printer and various materials. Characterized by its perfect combination of symmetry and uniqueness, it is ideal for anyone wanting to add a little flair to their interior design. Users can also modify the size according to their requirement adding to its versatility. Its design is not only functional but also provides an opportunity to create a unique lighting atmosphere in your home, office or any desired setting. Please note that this model needs to be printed with a material suitable for high temperatures underneath the bulb.

Space Nebular Desk Lamp

Greetings!

I'm excited to present you with my Space Nebular Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, however, that the components are compatible only with a specific Lamp Socket available on eBay.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Space Nebular: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Space Nebular part, you'll need to print the holder with supports.

Voila! Your Space Nebular Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Space Nebular Desk Lamp!

Light diffuser for kingroon led 3D printer light.

https://www.amazon.com/Printer-Light-Upgrade-Creality-

This is a light diffuser I created that clips over the Kingroon led light strip.

**Printed in: ** 
Matte white pla 
Supports  on
Brim on 
20%infill
open section facing downwards 


Ender/dp/B0B44P5SFP/ref=sr_1_3?crid=2EZB5Z03YL932&keywords=kingroon+led+light&qid=1689126276&sprefix=kingroon+led+light%2Caps%2C141&sr=8-3

Protopasta Lamp base + DIY customizable shade

Skull Lamp

Hey,
I'm glad you found my Skull Lamp.

You can stick any lamp in there, and it will glow in the color of the light, although these are the parts I used:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
Print with Supports, ideally tree supports.

That's it Enjoy your Skull Lamp. If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. Every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more lamp designs, or stay tuned for upcoming releases. 

Please keep in mind that this design is intended for non-commercial use only.

Braided Rug

Single Colour Braided Rug.stl

Dekosol clip.stl

Clip for top-down-bottom-up blinds/shades from Dekosol. Plisségardin as it is named in Norwegian. Dekosol blinds are sold by Kid interiør in Norway.

Voronoi Transformer Bulb Lamp 

Here you download 2 STL files of this transformer lamp shade. The base and the sphere.
The lamp hole diameter is 4cm.
The models are sliced and printed individually.
I recommend to print them with PLA+
Sphere doesn't need supports if it's printed wit PLA+.
It will have some overhangs which you can carefully cut out and file after printing.

Red mushroom lamp

hat.stl

Bay window angled curtain rod connector

13mm-curtain-rod-138-angle.stl

Earth Desk Lamp

Hey!
This is my Earth Desk Lamp.

You will need a lamp socket, and a bulb. I like to use a Multi color LED. These parts will only work with this Lamp Socket from Ebay. (it has an EU Plug)

EU Plug:

https://ebay.us/ASMco5

Bulb:

https://ebay.us/yB4Acp

You Support me by using these links!
US version coming soon!

Print Settings:
You only need to print the numbered files.
Earth: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm.
Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670).
Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40.
Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work.
No supports!

Holder:
Print with supports.

That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

I also have other lamps on my Profile (or they are coming soon!) check them out.
Don't be afraid to ask if something doesn't work, or you have suggestions.

Please note, this is provided as a non-commercial license.

Bunk Bed

Gracewindale-bunk-bed.stl

Chandelier.STEP

Mushroom lamp

Stem.stl

Mercury Desk Lamp

Pluto Desk Lamp

AGF Wall Clock

Face.stl

Touchlight LIght Bulb socket mount

Had some hanging lights that didn't have actual electrical ran to them and instead had battery powered LED puck lights stuck to them. These mounts make that more secure.

Light dimensions are 76mm diameter and 20mm height

Home Furnishings

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 15 new models

IKEA PAX ÖVERSIDAN light sensor cover

Lamp shade.3mf

Space Nebular Desk Lamp

Light diffuser for kingroon led 3D printer light.

Protopasta Lamp base + DIY customizable shade

View 11 new models

Braided Rug

Dekosol clip.stl

Voronoi Transformer Bulb Lamp

Red mushroom lamp

Bay window angled curtain rod connector

Earth Desk Lamp

View 143 new models

Chandelier.STEP

Mushroom lamp

Mercury Desk Lamp

Pluto Desk Lamp

AGF Wall Clock

Touchlight LIght Bulb socket mount