Pliers Rack for Skadis

Adapted this [Plier rack by prozach - https://www.thingiverse.com/thing:3776187](https://www.thingiverse.com/thing:3776187)  to fit the IKEA Skadis pegboard system.

Supports will be required for the upper pegs, you should be able to set enforcers such that the supports do not touch the bottom pegs and are very easy to remove (see screenshot)

This should fit tightly into the rack without any post processing as long as you are cautious while installing it - ensure it is fully slid down on the top pegs before pushing the bottom pegs in. My initial print fit and i've increased tolerances slightly from that but worst case you might need to sand down the bottom pegs a little bit.


Faucet Stop.stl

Mechanism for stopping handle rotation on a bathroom faucet. This piece is keyed to the splines and has tabs on either side that stop rotation when they contact a tab in the housing.
I didn't have calipers, when I was designing, so I guessed a size and matched by scaling x/y on the slice. I think 120% size was the one that fit.

Gridfinity Stepped Drill Bit Caddy

Gridfinity 64mm Hole Saw Caddy.step

64mm Hole Saw Caddy.step

Ikea Armoire Bracket - Rod Hanger.stl

Rod hanger Bracket for Ikea Armoire, add M5 screws in the holes to act as anchors, then mount them to the existing holes in your armoire!

BantamBox Panel Doors Basic (not quite finished)

BantamBox-v1Rough.stl

Ridgid Shopvac Filter Nut

Ridgid Shopvac Filter Nut. Used to hold the air filter in place. Fits a 7/16" x 14 Thread. Model based on the original design.

Mind Blowing LED Light Channels

LED 2020 Mount - Profile Trapezoid Sawtooth.3mf

bed level V1

Dynavap induction heater v2

Dynavap induction heater-Bottom.stl

shark verted vacuum hanger.stl

Shark Professional+ Steam Pocket Mop hanger.stl

Cabinet.STL

SuperSlicer profile that i used to print the leg

Lock cover for FAAC 740

Valance clip

If you have blinds that have the large valance on the front and you broke or lost all the retention clips, here ya go. I printed them at 50% infill with PLA and they are perfect.

Home & garden

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pliers Rack for Skadis

Faucet Stop.stl

Gridfinity Stepped Drill Bit Caddy

Gridfinity 64mm Hole Saw Caddy.step

Ikea Armoire Bracket - Rod Hanger.stl

BantamBox Panel Doors Basic (not quite finished)

Ridgid Shopvac Filter Nut

Mind Blowing LED Light Channels

bed level V1

Dynavap induction heater v2

shark verted vacuum hanger.stl

Shark Professional+ Steam Pocket Mop hanger.stl

Cabinet.STL

Lock cover for FAAC 740

View 10 new models

Gridfinity Nippers + Strippers + Pliers Racks

Shower Brush Adaptive Handle

View 10 new models

Wrench Hooks

Air conditioner cover