GreenScapes Succulent Planter

Y-axis motor mount

On my Voxelab Aquila X2, the y-axis mount melted, because most likely I set the wrong current to the motor. The shape of the carriage had to be changed, slightly to make it necessary to use less support. The holes are not symmetrically located, just like on the original part. That's how it should be. I printed in the position shown in the last photo. 

The carriage is made of sixth grade nylon with 30 percent glass filling.

I recommend printing with 35% triangle infill and 3 perimeters. Layer height 0.2 mm

USB type C Holder Collection

usb c 5.step

SD and micro SD card holder collection

sd card and micro holder 10

1/4 Quater inch jack holder collection

Holder for 10 1/4" headphone jack accessories.

1/4 Quater inch jack holder 10

3.5mm headphone jack holder collection 

holder to organise up to 10 headphone jack accessories

3.5mm headphone jack x 10 holder

Pen Holder (Creality Cloud Tool)


This was a quick test of the built-in maker tool and Slicer for this simple (not so simple) pen holder. start to finish was to try out the capacity of the maker tool on the phone, which worked a treat, and while fast, responsive, and easy to use allowed me to make something to a reasonably high standard. The built in Slicer on the mobile app worked the same as my PC with the default settings on a K1 it printed in 2h 50m with a filament change a few layers in when I ran out of white. There was some minor wisping of the new filament but completely untouched non Creality filament printed very well. There is some ghosting in this part due to the speed of the k1 and some known of firmware bugs, but for literally plug and play from a mobile you couldn't ask for much easier or better of a result in my opinion. This is well worth a print imo and is something I'm sure I'll make more of in future.
Originally hosted at https://www.crealitycloud.com/model-detail/652e5a6206d6cf3ae6afd1b0
all properties used are and remain property of Creality.


Dastardly Dovetail Box (Round Magnetic)

DDround_Bottom_Magnetic.stl

Headphone Hook holder hanger wall mount

A compact headphone hanger with a 3.5mm screw hole

Headphone Hook

Screwdriver Holder with spot for Stanley Knife

Screwdriver Holder 1_1.stl

ParkTool AWS-10 belt holder LONG VERSION

Keep your tools close at hand with this belt clip/holder For Park Tools AWSS-10 hex wrench set - also knowns as the best hex wrench set known to man.

Simply slide it onto your belt, pocket or other piece of clothing, slide the tool down and it's alwayss close without taking up space in your pocket or you putting grease in them.

To release the tool simply slide it upwards or to either side. Secure enough for running and jumping in the workshop - perfect for the stressful life of a home or workshop bike mechanic.

This version works great for pockets or other fabric lower than your waist, will make a longer version so you don't have to lift your shirt as often.

This version is longer and therefor interferes less with your shirt when worn on your belt

See orignal/shorter model at:  https://thangs.com/designer/Flaska/3d-model/Park%20Tool%20AWS-10%20belt%20clip%2Fholder-932562?manualModelView=true&source=mymodels

Zombie Trinkets Holder

ZombieHolderClean.3mf

Pen/Pencil Holder

A pen/pencil holder. Around 94mm tall. Scale to your desired size.

Rubber Duck Clip

A clip that slides onto your pants and then will hold your rubber duck

RubberDuckBelt.stl

Pokémon Card Box - Snap Fit Box

Print-in-place snap fit box made to fit Pokémon cards!

1 Piece design
Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Snap Fit Box Blank 50x100x50mm

Print-in-place snap fit box
50x100x50mm(outer measurement)
Feel free to remix this blank box!

Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Gridfinity Mitsubishi Uni Lead Pack Holder

This is a Gridfinity 1x4 holder for Mitsubishi Uni drop pencil lead packs. The fitment is quite tight to allow for magnetic mounting to an angled surface like a drafting table.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax 

Gridfinity Mitsubishi Uni Drop Pencil Holder

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

MUNBYN LABEL HOLDER V2

As with all of my projects, I wasn't completely happy with the other solutions. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should also work with other brands. In this version, I have reworked the sides and added a tray up top to save space on your desk.

**NEEDED HARDWARE**
4 - M4-0.7 x12mm Flat Head Screws

**3D PRINTING SETTINGS**
Layer Height - 0.2mm - 0.3mm
Material - PLA, PETG, ASA, ABS

Roller should be the only part that needs supports. The other parts make sure they lay flat.

Lower Tray.stl

Spray Bottle Hangar 

This is a Spray bottle hangar I designed around a basic idea with a strict guideline. 
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
 

** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has reduced file size from  9.64Mb to 1.06Mb. Changed Mouse ear generation from eye balled placement to a grid deploy and changed the 2 sides from separate sketches to a mirrored sketch increasing the symmetry by 0.05mm. 
Again any issues or notes please comment, Makes are always appreciated. 

Holder

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GreenScapes Succulent Planter

Y-axis motor mount

USB type C Holder Collection

SD and micro SD card holder collection

1/4 Quater inch jack holder collection

3.5mm headphone jack holder collection

Pen Holder (Creality Cloud Tool)

Dastardly Dovetail Box (Round Magnetic)

View 24 new models

Screwdriver Holder with spot for Stanley Knife

ParkTool AWS-10 belt holder LONG VERSION

Zombie Trinkets Holder

Pen/Pencil Holder

Rubber Duck Clip

Pokémon Card Box - Snap Fit Box

Snap Fit Box Blank 50x100x50mm

Gridfinity Mitsubishi Uni Lead Pack Holder

Gridfinity Mitsubishi Uni Drop Pencil Holder

MUNBYN LABEL HOLDER V2

Spray Bottle Hangar