Dragon Touch Vision 3 Camera Mount for Vex

This was designed to mount to a Vex plate and snuggly Hold the Dragon Touch Vision 3 action camera. 

Antenna Mount for Vex V.5 Receiver

The antenna holder for the V.5 receiver kept breaking the wire, so I designed one so that the antenna doesn't have to bend sharply.

Remote Organizer

Remote Stand 3 Holes.stl

Wacom Pen Holder Skull - Desk Ornament

Wacom Pen Holder Skull - Desk Ornament
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.


Brillar LED Remote Control Wall holder 

A quick simple print to mount your Brillar Branded light remotes on the wall. Print may need a brim depending on your bed adhesion but worked well on my 2 machines. .STEP is available for free on my gumroad.

Brillar Remote Control Holder

Hollow Skull - Pencil Holder - Decor

Hollow Skull - Pencil Holder - Decor
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

3DJake Vacuum Clip Holder

3djake vacuum clip holder.3mf

xTool D1 + Pro Holder and Raiser

Xtools_Halter.step

Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 80mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Pop Can Cooler Lid Holder

12 OZ Cup.stl

Cup Of Miscellaneous

 Battery Cover Canon LP-E17

This is a cover for canons LP-E17 batteries. It should fit batteries for 

    EOS RP
    EOS M6 Mark II
    EOS 850D
    EOS 250D
    EOS 200D
    EOS M6
    EOS M3
    EOS 760D
    EOS M5
    EOS 750D
    EOS 800D
    EOS 77D

Parametric rectangular holder for Gridfinity

qtips holder.stl

Parametric round and elliptical holder for Gridfinity

bostik thread locker holder.stl

Spool Holder

End bracket for simple spool holder/rack.
Print 2 without support.
Use two pieces ¾" PVC pipe: https://a.co/3kMfGNA

SD card + USB holder - 40mm Mount

Based on:
https://thangs.com/mythangs/file/603131

But using an actual mount as many people don't have tape/etc. 

40mm should fit the side of most printers using 40mm x 40mm brackets, and many wooden desks, etc. 

Feel free to remix into whatever size you need. 

Gridfinity Pill or Small Bottle Holder

This simple block should hold any 32mm bottle.

Raspberry Pi Camera Mount for Ender 2

ender2_raspicam2_mount-v2.step

business card holder TAKE ONE

Made for business card sized 91mm x 61mm but will obviously fir smaller ones as well! 

Print takes quite a while as it is a large piece but looks great on any desk!

HOLDER

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dragon Touch Vision 3 Camera Mount for Vex

Antenna Mount for Vex V.5 Receiver

View 10 new models

Wacom Pen Holder Skull - Desk Ornament

Brillar LED Remote Control Wall holder

Hollow Skull - Pencil Holder - Decor

3DJake Vacuum Clip Holder

View 12 new models

Chain Link Gridfinity Bin 100mm

Chain Link Gridfinity Bin 80mm

Pop Can Cooler Lid Holder

Cup Of Miscellaneous

Battery Cover Canon LP-E17

Parametric rectangular holder for Gridfinity

Parametric round and elliptical holder for Gridfinity

Spool Holder

SD card + USB holder - 40mm Mount

Gridfinity Pill or Small Bottle Holder

Raspberry Pi Camera Mount for Ender 2

business card holder TAKE ONE