A Minimalistic Coat Hook to build a coat rack. I built mine on a plywood panel covered with faux leather and hung it with hooks (see Photo) but you can use it directly on the wall with fisher type nails.
Easy to paint with acrylics.
The Lower part has holes to mount, the upper part cover and slips on the lower.
Note: print on side to harden the structure.
Note2: i use either PLA or PETG, the latter seems to be the best to hold weights.

Hope you enjoy it.


Coat Hook - Minimalistic

Coat Hook Upper.stl

Headphones (w/wo mic) Holder for Monitor/small surfaces.
Use biadhesive or hot glue to block in place.
#headphones #holder

Headphones Holder

Simple Battery Holder, designed with Onshape Web software.
Used for Rechargeable batteries at home.
Made in PLA, it can stack upon 12 AA Batteries and many more of AAA type.
It's made of 2 pieces, easy printable with each solid side on printer floor to eliminate the need of supports.
If printed in PLA you can use common Superglue to hold them together.

Total weight of 46gr of PLA material and takes approx 3h of printing time with 50mm/s settings.

see attached photos to see printed model in red PLA.

Have fun! :)
#DIY


AA AAA Battery Holder to stack rechargeable batteries

Battery Holder.stl

Pencil Top Cube with Mario Stars.
22x22x22mm dimensions,
12mm hole diameter for various pencils.
Designed for my Child.
Have Fun.
#DIY

Mario Star Cube Pencil Top

Made for my Honor 5 Smartwatch, it's a spare part for my lost strap clip.
It can be used for many Smartwatch - Smartbands.
16,5mm internal strap width, 10mm height


Smartband-Smartwatch Strap Clip-Holder Spare part

Made for my Honor 5 Smartwatch, it's a spare part for my lost strap clip.
It can be used for many Smartwatch - Smartbands.


Cable Clips to hold cables tied in place.
3 different sizes.
Easy to use, rigid and with no need to close.
Inspired by other similar design.

Designed with Freecad 0.19

#DIY
#CABLES
#ORGANIZED
#CLIP


Cable Clips - Small - Mid - Large Sized

Made for cables with diameter 0,4mm and larger.
simple but funcional design.




CableClip-Small.stl

Small Cable Reel for all needs: USB cables mostly, small AC cables, headphones cable, audio cables, etc.
Only 2 pieces, click press-fit locking.
Manual operation of winding cables.
Photos are taken from print done in Gray PETG.
Needed only a little sanding with 600 sandpaper on the inner side.
Hope it can be useful.

#DIY
#CABLES
#ORGANIZE


Small Cable Reel 60mmx15mm - 2 pieces 

part of my Small Cable Reel 60 x 15 mm for all type of small/medium cables.
Total 2 parts. Press Click locking.



Cable-Reel-External-part.stl

Simple decorative plant vase to hold a bonsai or alike. It has a water tank below to let it have water for a long time.

Done with Freecad 0.19!

Mini plant Vase with Tank - 140mm x 70mm

External Part for the mini plant vase w tank

vaso_serbatoio_140x70-Parte Esterna.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

mhvant