👓 Flexi Eyeglass Holder – Stylish, Fun & Functional! ✨

This 3D printable model is a Flexi Eyeglass Holder that has a glasses silhouette on one side and a slot for your glasses on the other. It’s a smart and fun accessory that you can use in two ways. You can use it flat as a simple and elegant holder for your glasses, or you can bend it and transform it into a cool and creative stand for your glasses, where the glasses silhouette becomes the base and your glasses go on the top.

I have designed this model with Tinkercad like all the flexi models I have made so far. But in this case, movement is useful and transforms it into this very practical and stylish holder for glasses.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is print-in-place and does not need any assembly. It has a smooth and sleek design that will fit any glasses size and style. This Flexi Eyeglass Holder is a great way to protect your glasses from scratches and dust, and to display them with flair. Download it today and give your glasses some love!

ALL Frikarte3D designs are protected by the Copyright Law. By purchasing, YOU HAVE NO RIGHT the right to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Eyeglass Holder 😎

Pencil Dinosaur

Pencil Dinosaur Stripey.stl

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

hexo pen holder

walls are 2.8mm thick to make printing as easy and fast as possible for .4 & .8 nozzle sizes

Pencil Bench

A pencil holder in the shape of a bench

Prints without supports

Holds 12 pencils

Barrel Coaster Holder

Barrel Coaster Holder.stl

Concrete candle holder “Gugelhupf”

**A beautiful concrete candle holder – easily produced at home**
Candle diameter: 16 mm - 26 mm

**What you need**
- TPU filament
- Hobby grade pouring concrete
- Water
- Optional: Acrylic colors
- Optional: Vaseline or kitchen oil

**Instructions (also check images)**
1. Print the mold in TPU – I you have not yet printed this material, check YouTube for instructions. It’s quite easy even with a beginner machine like a Ender 3V2
2. Mix the concrete according to the instructions of the manufacturer
3. Optional: Add acrylic colors to the mix
4. Optional: rub the inside of the mold with Vaseline or kitchen oil for easier separation later
5. Pour the mix into the mold
6. Optional: Bumb the filled mold lightly on your table to get rid of air bubbles
7. Wait until the mix dried. Note that the acrylic color might add to the time it takes to fully dry.
8. Remove the cast by inverting the mold and pulling it out
9. Optional: Paint the cake
10. Have fun!

Size of the finished holder: 89 x 89 x 41 mm
Don't forget to post your makes

**Print settings**
Required build volume: 100 x 100 x 60 mm
Material usage: 40g
Print time: 4h

Material: TPU 95 – other shore hardness down to 80 should work, too – but are not tested.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Elegant Phone holder For Iphone 7

I think I have a Iphone 7 and thats what I used to base my stand of off. if you have a wider phone you may want to print it so it will be wider. if your phone is slightly larger it should still work.
the swoop at the bottom is slightly too big for my phone but it does function.

I printed mine with a .4mm nozzle. the walls are 1.6mm thick meaning there is 4 layers of filament per wall. The object should be printed laying flat and you may need to lower the model  by -.1mm to get it to touch the plate properly.

Created by B._.render
CC-BY-NC

Rocky Bowl

I made an excellent bowl design to display some of my family's findings on a dig experience while on vacation. It can show or store anything from keys assorted items, and rocks. 

HOLDER

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

👓 Flexi Eyeglass Holder – Stylish, Fun & Functional! ✨

Pencil Dinosaur

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

hexo pen holder

View 17 new models

Barrel Coaster Holder

Concrete candle holder “Gugelhupf”

Elegant Phone holder For Iphone 7

View 12 new models

Rovyvon E5 Holder

Ring Holder-v1

Fox phone holder

Cake Topper Candle Holder #PartyThangs

View 143 new models

pencil holder pencil

View 31 new models

GridFinity Polestar 2 Key Holder

Pocket Socket Bar - 3/8in Drive

Gridfinity Tamiya Weathering Master Holder

Katana/Sword Holder - Wall Mount - remixable