Foot for your projects - Petamentor2

petamentor_kwerkshop_foot.stl

Anti vibration foot for cabinet

Anti vibration foot for cabinet.stl

Seth Thomas mantle clock foot

mantle-clock-foot.stl

Couch Foot.3mf

A standard foot that bolts to the underside of a sectional couch.

Iron Board Foot v1.3mf

A replacement foot for a typical full size Ironing Board

Replacement foot for Hyper X Alloy Origins keyboard

noga za tipkovnco (1).stl

APC 1500 UPS Feet - Stand.3mf

This is a base / stand / foot that allows a rack-mountable APC 1500 UPS to stand stably on its side if you will be leaving the UPS on the floor

Foot Button

foot-button.step

OP-1 4 Pedal Kit

Pedal Frame.stl

Dry Shoe Deodorizer

shoedry.stl

Flexispot E7 Desk TPU Foot Covers

Slip on TPU covers for the foot pads on my [FlexiSpot E7 desk](https://bit.ly/FlexiSp). 61.25mm inner diameter, so you can do the math to scale this for different uses as well :)

Light Stand Caster Add-on

As the title suggests, this is designed to add basic hardware store casters to any tripod or light stand.  Should work on boom stands, C-stands, or any other photography based hardware. )

I would suggest printing this with a very dense TPU, as my experience with ABS was that there was too much torque applied, resulting in a lot of force on the layer adhesion.  

I used these for 3 years before acquiring actual Manfrotto casters.  Honestly i don't see any functional difference. 

NOTE: If you're not used to using rolling light stands, PLEASE WEIGH YOUR STAND DOWN.  I use standard sand bags, but anything to bring the centre of gravity down is good.  

Don't blame me if you tip your $2,000 strobe light over onto concrete!

Folding Chair Mount.stl

This model is designed to be printed in TPU.  It is made to mount a folding chair to a fixed base (removing the folding feature).

I used to use a padded folding chair in my shop for a while, and designed these to make it feel more sturdy.  

Hairy Toe - Hairify Blender - Remix of TOETOW by LayerOne3d

Some of the best toes in history have been hairy and this is no excpetion.

Originally designed by @LayerOne3d to cover a towing hook, I have scaled the model down and added hair using the Hairify Blender plugin.

2x2020 50mm Hefty Foot

Some time ago I needed to replace fans under mobo and PSU. To do it, I needed 50mm clearance, so I designed that Hefty Feet.

You can use it in 3 ways:
- just slide them in to profile
- bolt to profile with 3x m4 nuts and screws (min lenght 15mm)
- bolt down to surface with 5mm countersunk screws

I printed them with 10% gyroidal infill and pour resin inside with steel shavings filler.

2x2020 50mm Hefty Foot.obj

Halloween Bloody Foot

This is a severed foot designed to help participants in Creality Cloud's Halloween Print and Paint contest.

It is a model of a cut foot, where you can see the bones sticking out from above and with some holes in the skin where bones also appear.

I hope you can enjoy printing and painting it as much as I have enjoyed designing it.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at @Frikarte3D

Halloween Bloody Foot 🦶🩸🎃

Vibration Damping Feet

Vibration Damping Feet (1 nut).stl

footrest_1.5.stl

If you want to see what else is in the works, follow my Instagram! @wiseprints206

This is designed to be a footrest for my desk. The back of my desk has this metal plate that is not great to put your feet on, as its somewhat sharp. I whipped this thing up real quick to be printed with ninjaflex (PLA will work as well obviously but ninjaflex is more comfy on the bare feet).

Claw Foot Tub (For Raphael TMNT Scene)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

----------------------------------------------------------


CLAW FOOT TUB for Raphael TMNT Injured Bath Tub Scene.
Link Added SOON.

Teenage Mutant Ninja Turtles 

Prop From The TMNT Original motion picture when raphael is in the tub recovering with Sad leo looking over him.

Hope you are enjoying these models. Please consider going to my patreon and helping a brother out.

Stay Posted for more TMNT original motion picture models!!!!

- *GIVE ME YOUR OPINION IN THE COMMENTS*


----------------------------------------------------------
If print some of my models please tag me on social media.

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d

KEEP ON PRINTING!!

Foot

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Foot for your projects - Petamentor2

View 44 new models

Seth Thomas mantle clock foot

Couch Foot.3mf

Iron Board Foot v1.3mf

Replacement foot for Hyper X Alloy Origins keyboard

APC 1500 UPS Feet - Stand.3mf

Foot Button

View 78 new models

View 18 new models

View 66 new models

View 13 new models

View 14 new models

Hairy Toe - Hairify Blender - Remix of TOETOW by LayerOne3d

2x2020 50mm Hefty Foot

View 18 new models

Vibration Damping Feet

footrest_1.5.stl

Claw Foot Tub (For Raphael TMNT Scene)

View 25 new models