Wacom Intuos Mouse // Peg Anything

A customized pegboard fixture made just for the mouse of my Wacom Intuos tablet. Snaps into place on any standard pegboard with 1/4" holes spaced 1" apart



CyberDeck V1

rear_case_v1.stl

Your Wife called!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Gridfinideck - A Gridfinity Cyberdeck Mobile Platform

Gridfinideck.stl

Ask Santa for a 3D dragon!!

This display stand is perfect for upcoming craft fairs!  
I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Cute Computer Bank (desk companion - kawaii piggy bank)

Computer.stl

Eu te amo! Porta Retratos 2.stl

Romantic picture Frame (I love you, in portuguese)

Anycubic Mega Zero 2.0 5015 cooling fan duct

MZ 2.0 Part Cooler 5015.stl

Logitech Shifter Stabilizer

This is a stabilizer designed to fit onto the screw clamp of the Logitech Driving Force Shifter compatible with the G29 & G920 series wheels. (It may fit other models like G27, I'm not sure

Logitech_Shifter_Stabilizer.3mf

$35.00 Display sign

"Win Diesel" windows key cap

Nail bit box

A piece of 1,75mm filament goes into the hole.

FHW: Set size blank

this is the blank slackers..
Cheers
Maker

Ok To Play Sign

This sign was requested by a Thangs member!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No

EXCLUSIVE: Retro Video Game Fidget Clicker Keychain Bundle

Retro_Game_Icons_v01.3mf

Double Bladed Axe Headphone Hanger

Double Bladed Axe Base.stl

Shelves

Easy design easy print , no need for supports .
You can see how i made it here https://youtu.be/clmT-4y3t1U

Computer

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wacom Intuos Mouse // Peg Anything

CyberDeck V1

Your Wife called!

Gridfinideck - A Gridfinity Cyberdeck Mobile Platform

Ask Santa for a 3D dragon!!

Cute Computer Bank (desk companion - kawaii piggy bank)

Eu te amo! Porta Retratos 2.stl

Anycubic Mega Zero 2.0 5015 cooling fan duct

Logitech Shifter Stabilizer

$35.00 Display sign

"Win Diesel" windows key cap

Nail bit box

FHW: Set size blank

Ok To Play Sign

EXCLUSIVE: Retro Video Game Fidget Clicker Keychain Bundle

Double Bladed Axe Headphone Hanger

Shelves

Apple Magic Mouse Ergonomic Case Mac Office

OTF Headset Holder - Switchblade Mechanism

2 x 2.5" HDD to 3.5" HDD Mount