Xbox Inspired Alpakka Analogue Stick Mod
Dimple Variant
This mod is a variant of the plain Thumb caps and is an option if you don't want to use a 3rd part thumb cap
8 Flavours As Follows -Flat Dimple Short Length Thick Base -Flat Dimple Short Length Thin Base -Flat Dimples Tall Length Thick Base -Flat Dimples Tall Length Thin Base -Recessed Dimple Short Length Thick Base -Recessed Dimple Short Length Thin Base -Recessed Dimples Tall Length Thick Base -Recessed Dimples Tall Length Thin Base
Tall Length = 20mm Short Length = 16mm
Thick Base = 9.7mm Diameter Thin Base = 7mm Diameter
Flat Head = Print on Flat head (Not Supports Needed) Recessed Head = Required supports
Recommended Print Settings
Nozzle: 0.4mm Layer Height: 0.07mm [Trust me, the extra quality helps] Walls: 3 Infill: 15% Gyroid Pattern Supports: Not required if you print with the cap facing on hits head
Supports may be needed, Raft may be needed for better bed adhesion
Let me know if you have any issues or would like to see more Mods
Please check out and support the amazing creators at Input Labs
Input Labs Youtube: Input Labs GitHub: Input Labs Roadmap: Input Labs Discord: Input Labs Patreon: [Contact:] (press@inputlabs.io)
Check out my profile here
Happy Printing