Torture Calibration Test

Mini Test Cube

THE TEST DISC | Z-Offset Calibration Disc

TESTBED_Z-Disc.stl

The House Of Benchmark

house_of_benchmark_one_piece.stl

Aurebesh Calibration Cube

20mm calibration cube, but "X,Y,Z" replaced by Aurebesh alphabet.  Just nerdy fun for Star Wars fans.

Maker Coin

Maker Coin.stl

Retraction Test For 3D Printing

Retraction Test.stl

Lattice Benchy (Wicker Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice: https://than.gs/m/874758 
Wicker:


Lattice Benchy (Face-centered Cubic Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice:
Wicker:


Calibration Fool

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 
See here for video: https://youtube.com/shorts/ii4bMlS8C14 


XYZ Cube Box

XYZ Box.stl

Rounded XYZ Cube

XYZ Cube

XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

Yet another fidget cube

I Love 3D Printing Gag Gift Mug

Clogged nozzles, layer shifts, poor layer adhesion… anyone familiar with 3D printing will recognize these!

See here for video: https://youtu.be/FJbw00gRW_4  

Are getting or giving a 3D printer this holiday season? This model is the perfect first print! Just hit print and walk away. Any flaws will only make it better!

3D designing and printing teaches us to expect mistakes, plan for them, fix them and try again. If you are new to 3D printing, you can expect to have more than a few prints that come out looking something like this mug.

Disclaimer: All flaws in this model are intended and don’t represent the quality of the brands shown! Lulzbot makes excellent printers and eSun makes excellent filament. Both are great options for avoiding the 3D printing pitfalls that you see in this print!


Calibration Cube

This is a calibration cube based on my logo. The dimensions of the cube are 20 mm x 20 mm x 20 mm. The indentations are 1 mm deep. On the opposite side of each wall are small letters indicating X, Y, Z axes.

CR10 S5-First Layer Calibration

A simple first layer calibration test for the CR-10 S5 (or similar 500x500 mm bed size).

I made this after finding that the generated skirt (on similar layer tests) on my slicer was not what I needed. This removes that variable.

Actual Dimensions are 440.2 x 440.2 x .2 mm (LxWxH)

The pattern is .2mm thick. Skirt not necessary, or intended, for printing.

Social Media Calibration Cube - Flex your precision!

Calibration_Cube_Social_Medias_V1.step

Benchmark Bot

Move over boat, there is a new benchmark in town.

This robot is not only a fun print-in-place figure but it is also a very useful calibration tool.

The robot is designed with 17 functional joints with different orientations, couplings, and tolerances. The tolerances range from 0.2 - 0.5mm and allow you to test the minimum clearances your printer can produce and still achieve print-in-place movement.

Each limb is labeled with the tolerances of their joints and all other joints have a 0.3mm tolerance. It might take a little (just a little) bit of force to break them free any more and you risk breaking the robot.

It only uses 20g of filament and is small enough to fit on a Prusa mini or even a Voron V0.

Calibration

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 16 new models

THE TEST DISC | Z-Offset Calibration Disc

The House Of Benchmark

Aurebesh Calibration Cube

Maker Coin

Retraction Test For 3D Printing

Lattice Benchy (Wicker Lattice)

Lattice Benchy (Face-centered Cubic Lattice)

Calibration Fool

XYZ Cube Box

Rounded XYZ Cube

XYZ Cube

View 25 new models

Yet another fidget cube

I Love 3D Printing Gag Gift Mug

Calibration Cube

CR10 S5-First Layer Calibration

Social Media Calibration Cube - Flex your precision!

Benchmark Bot

Hinged Calibration Cube Accessories 02