Ghosting Calibration Tool

Ghosting Calibration.stl

Calistar (formerly Fleur de Cali) - Open source printer size and skew calibration

calistar_120x3.stl

ZOffset-Calibration

zoffset-calibration.stl

Lost Factory Cube - A generalist *diagnostic* cube

This cube tests for a lot of basic calibration and hardware issues on an FDM printer, all at once.

You need to print this cube:- 

at 0.2mm layer height
on a 0.4mm nozzle (or smaller) with 0.4-0.46 line width
The screw and rod parts snap off to test in the screw holes and normal holes. There are ghosting, overhang, cooling, ovality tests among other things. 

This work is licensed under a
Creative Commons (4.0 International License)
Attribution-NonCommercial, you may not redistribute this commercially, please link to this source. You can however show it in your videos or whatever, commercial or otherwise. 

Rapid 3DShield Tungsten Density Calibration Model

Minimum5.5Grams.stl

The Virtual Foundry Universal Calibration Rings

Universal Calibration Rings.stl

First Layer Squish Calibration Tool

First Layer Squish Tool 0v04.stl

Calibration Cube

xyz-cube.stl

And All it Prints are These Stupid Boats

Water - Using the Boats Included.stl

Auxetic Cubes // 18mm 2x2

Auxetic Cubes 18mm 2x2.stl

Frikarte3D XYZ Calibration Cube Plus

Frikarte3D XYZ Calibration Cube Plus.stl

Calibration Hammer a.k.a. Hammer 2.0

Calibration Hammer.3mf

Flow Calibration Tiles

Tippi Tree Test Piece

Here's the test piece for [Tippi Tree](https://than.gs/m/933018). You can use it to make sure your printer settings are well-tuned for printing your Tippi Tree without using too much time or material.


Recommended: PLA 0.4mm nozzle, 0.16mm layer height, 11% infill, 2 shells, 5 top/bottom layers

The Maker Medic Calibration Cube

A classic calibration cube (20mm x 20mm x 20mm) modeled after my blog logo.

Perfect First Layer Test

This is a first layer calibration test for any printer. It consists of 5 tiles 32 mm wide.
 
---

**Recommended print settings**

- layer height: 0.2 mm
- fill angle: 0°
- perimeters: 2
- first layer speed: 25 mm/s

It should be centered on the bed and stretched as close to the edges as possible (exactly like this in the right picture).

Live adjust Z while printing, if necessary.

---

**Interpreting results**

Each square should look the same. Surface of the prints should be smooth and pleasant to the touch (just like the one in the left picture).

The tiles should be very difficult to tear apart.

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

CNC Mill Zero Point Block

This little tool helps align the end mill of your CNC to the very corner of your rectangular stock. It has lines that help you manually find the center more accurately than without. The hole is for a 1/4" end mill, but it can still help for most sizes (and it should scale quite easily if you choose to print at a different size)

SwatchGRID - 20mm Calibration Cube Holder

20mm cubes make a nice color/material swatch,  Not a lot of room to write what they are, but just enough for me. This grid holds them securely, with holes in case some of your cubes don't want to leave home.

Printer Clearance Test Puzzle

a.stl

Calibration

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ghosting Calibration Tool

Calistar (formerly Fleur de Cali) - Open source printer size and skew calibration

ZOffset-Calibration

Lost Factory Cube - A generalist diagnostic cube

Rapid 3DShield Tungsten Density Calibration Model

The Virtual Foundry Universal Calibration Rings

First Layer Squish Calibration Tool

Calibration Cube

And All it Prints are These Stupid Boats

View 22 new models

Frikarte3D XYZ Calibration Cube Plus

Calibration Hammer a.k.a. Hammer 2.0

Flow Calibration Tiles

Tippi Tree Test Piece

The Maker Medic Calibration Cube

Perfect First Layer Test

cute calibration cube

View 21 new models

SwatchGRID - 20mm Calibration Cube Holder

View 72 new models