Replacement steering part for New Bright RC car system. This is modelled after a Ford Mustang Mach-E bought is 2025 July. Not sure how common this part is, feel free to try it and see if it fits your

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign ※ It contains only some parts including track car body. The whole excavator is not included. ※ Download Ex

Take to the skies of the Mushroom Kingdom with this 3D printed Clown Car as seen in Super Mario World! Each piece is designed to be printed separately and assembled together. No AMS needed. The

Take to the skies of the Mushroom Kingdom in Bowser Jr.'s Clown Car as seen in New Super Mario Bros. Wii and Super Smash Bros! Each piece is designed to be printed separately and assembled together. *

Take to the skies of the Mushroom Kingdom with this 3D printed Jr. Clown Car as seen in New Super Mario Bros. Wii and Super Smash Bros! Each piece is designed to be printed separately and assembled to

Design of a car seat.

Attach a Multiboard to you car vent! The “Double-Sided Snap - Part A” joins with the “DS Snap - Part B” to create nice-looking snaps on both sides of your tiles. Remember: Part A’s join with Part B’s

Steering arm link For RC toy car

Printed in TPU with a small wall width this came out pretty well to replace some perished rubber tyres on the old Dinky model in the images. Use this reference site for a tyre fitment guide: [click](

Parts are modelled and assembled in Solidworks

Revamp your RC Drift Car with this top-quality RC Car Rims Arc 1:10 scale 3D model by MRC Studio. Expertly designed for RC Car Drift, this 3D model features a standard hex of 12 mm +12, perfectly suit

Hello! So, it was that time again, another broken phone holder. They work ok for a while but after some time they just are made to be replaced by a new one… So I decided to put my 3D cad design skil

Motor mount autonomous car

This is a detailed representation of a vehicle with working suspension, doors, windows, and steering wheel ensuring an immersive experience. This intricate 3D model even features spinning wheels, just

High-quality Retro Car 3D model designed specifically for 3D printing. This classic vintage vehicle features clean details and is optimized for hobbyists, collectors, makers, and automotive enthusiast

Here is a tiny car inspired in the 50's F1 cars and vintage toys as a phone holder. This is a multi part print, the parts fits in the body of car, but you need glue to secure it, enjoy printing! :)

Version 2 out now yes parts from version 2 can be used with this design https://than.gs/m/1517754 Here is Phone Clamp Car holder, This awesome design lets you attach your phone to your Car's Air

I (finally) got a Spotify Car Thing and the first thing I thought to do with it is turn it into a portable media screen. This only requires one extra part: the CD mount which comes as part of the Car

Toilet-Paper Holder For My Camping Car

This toy car is a direct replacement for the IKEA Lillabo platform and requires no screws for assembly! -- Please feel free to contact me to get further info on the model or for any printing

Adjustable shock for RC Car. Additional parts: M3 screw 35mm Compression Spring 0.9mm wire (50mm or 60mm length), 12mm OD Super glue You can use Mesh Tools -> Split Model into parts (add-on in

One model a week - Week Four

Bring speed and style to your next 3D printing project with this highly detailed Super Sport Car model. Designed specifically for 3D printing, this STL file is optimized for hobbyists, collectors, mak

Sport car rim

A rear lower suspension arm I used for my 1/10th scale rc car. Copied the design of the existing arm on the otherside. I used PLA 15% infill and printed it horizontally

When driving passengers around they would often accidentally unbuckle my child's car seat when buckling in or unbuckling themselves. As it was a hassle to keep buckling it back in I've designed this

A collection of plastic parts for the rear viper motor of a Hyundai I30 2009-ish model I had one that was seized and the plastic parts brittle, cracked, broken or all of the above. So here we are :)

This is my crappy Pico W RC car, made with: SG90 Continuous (360) motors x4 2.5M 6mm Machined Screws x8 Raspberry Pico W x1 128x64 px Oled SPI Screen (yellow and blue) x1 small RG

A rotating stand for a TRX-4 RC car, but with the 'Chassis Tray' part on top it should work for a range of models. 3/8" balls for the bearing, although a range around there should work fine (sorry, I

Some cars from Dacia and Renault use a flat key design. This model is a replacement part for the backside of the car key. Manche Autos von Dacia und Renault benutzen eine flaches Design für ihre Autos

Needed a car rego pouch / holder so made one. Use small strips of badge tape along the three edges to stick it to the window (stick the tape on then trim with a craft knife). Fits New Zealand standa

Steering wheel phone holder. Simple design to hold a phone horizontally or vertically. Only use when stationary. PILED 3D Calculator shown on scree

I have a hook on my B Pillar for the jacket but then it is covering the cars for the shoulder check. I made this hook for the headrest and it resolves my issue Print at least in PETG for heat resist

version 1

You can now download the new design chosen by vote: the legendary Ferrari F40 with interior and engine, stylized in StanceGT’s caricature style! This is no ordinary model… In addition to its detailed

The car uses rubberbands on the tires for traction(tank like treds) and has a dc mount on top. This is a really hard to print piece and is not tested, its a bit small as my printer is the ender 2 pro

Cover for car windshield water reservoir, for model Celta 2005 Chevrolet

Athearn Coupler Retainer Clip HO Train Cars. Replaces the metal clip holding couple in place.

Cradle to hold my 6 pro in its phone case in our car phone holder.. the kids like to watch tv shows and the phone kept on falling out of the holder because of my case, so knocked up a cradle so it fit

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5843608. A 3D-printed wind-up car with a 16:1 gear ratio is a miniature mechanical toy that is powered by winding a sprin

1/10 scale RC car dual exhaust pipes

Allows you to mount your small MP3 player onto a standard mobile phone holder or car mount. Easy to unmount it and connect to power or AUX jack. This type of MP3 players is commonly seen on sites like

Projectvideo: https://youtu.be/hjCWHOE4sb8 3d printable print-in-place and articulated Surprise Egg The cars and the egg was each designed to be printed in place without any support structures. The

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4916117. Designed this in Fusion 360 for my 2000 Chevy after my factory remote broke. It is just the outside case. All th

Couldn't find a free DaBaby car model that could roll so "I did it myself" - Thanos (not verbatim). Plus I added a personal touch by making it l o n g. Assembly notes: Connect wheels by running a

Backstory Me and my wife kept seeing these ads for phone holders that slide into a cup holder in a car. I decided to give it a go at designing one to fit into a Toyota Prius. I designed it in A

classic car mirror from the 70ies

Fits most 1/10 scale RC Cars