Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4916131.

A basic Joystick extension that snaps on top of factory controllers to give you better control and feels a little better in my hands. my thumbs dont seem to get stressed as much after long sessions of play time. used PLA at .2mm with supports for the under side and midsections. i wanted the top to be smooth as possible and it has a slight inward curvature(pocket) for ur thumbs to set in to help with control.

Joystick Extension

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3909818.

just a simple design of rope and anchor printed at .2 mm with standard PLA filament.
printed with white PLA with supports. Black is actually just a permanent marker because i dont paint and my daughter was in a hurry for it....lol

Anchor Light Switch Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4916117.

Designed this in Fusion 360 for my 2000 Chevy after my factory remote broke. It is just the outside case. All the electronics are fit in place from the factory remote. It is snap fit close with rubber seals and electronics but not for sure if seals work for moisture.  Its not perfect but i have been using it for 2 years now and no issue. you may have to orient the pieces to lay flat but it will print with no supports. used pla filament at .2mm.

Car Remote

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2899072.

Saw a nice Pittsburgh Steelers coaster(thing#646863) created by spondoro so i printed and liked it. i didn't see much for Harley Davidson so i decided to create one since i am just beginning in Fusion360 and 3d print.

update(03-10-19):
 decided to add an insert for Harley symbol to help add color if you want to the project. can print main coaster out in one color then print the symbol separate in different color. it is offset by .25mm from the edge and on my printer it fit just perfect to create flush edges, also smooth bottom face.

Harley Coaster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4023642.

this is a section of a larger universal hanger. i could no longer find these so i made some copies of the piece i had. it is used on the inside of windows to hang items such as lights.
i used both PLA and PETG to print with same results. in the photo is the original, white PLA, and black PETG. No supports needed because it prints flat to bed. i used .2 layer

window hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4916143.

Bought a new Ryobl weed trimmer and noticed it took a special tool to wind the trimmer string onto the spool. so i made a copy just in case mine broke or i lost it. its not exactly the same but it does the trick for me. the handle is meant to be held on by a single screw and float so u can crank it in circle. used PLA .2mm supports needed only for cap handle, main unit prints without.

Weedeater crank

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3483714.

another coaster while learning to import in fusion360

1) print coaster in your choice of color
2) print color plate in what color u want the fish to be then glue in bottom of coaster
3) print picture plate in same color as coaster or another color then glue in as well

Fish Coaster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3724074.

just another simple coaster. there are 2 stl files, one is the coaster with the cut out itself. it was designed for a single color. the second is the insert of the cut out so u could print in a second color if u wanted. 

Under Armour Coaster

just a hobby for me. make replacement parts for my stuff that has broken/worn out or for a friend/family member thats needs a fix/customization.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>just a hobby for me. make replacement parts for my stuff that has broken/worn out or for a friend/family member thats needs a fix/customization.</p></div>

Spasmatic