Heemeyer Hook

Heemeyer Cage

Heemeyer BASE (Axels)

Heemeyer_chassis.stl

Heemeyer_Rear

Heemeyer TREADS (Trax)

Plow.stl

Heemeyer_killdozer.stl

There are no overhangs that need supports, If your bridging settings are good you'll have no issues. 

Original Nvidia Shield Tablet Case (NO SUPPORTS)

A Remix of a GREAT "Fully Printable" Mouse Trap.

I removed the need for supports and screws from the original Design found here.
https://www.thingiverse.com/thing:2815083

Mousetrap_Front_door.stl

Mousetrap_SeeSaw.stl

Mousetrap_Main_Body_No_Screws.stl

Mousetrap_Lid_Remix.stl

Mousetrap_Back_Door.stl

Basic honeycomb fan grill designed to optimize your fan's airflow but keep fingers safe

40mm Fan Grill "HoneyComb"

RC Car Muffler No Mount

RC Car Muffler Axial SCX10 II Mount

Companion Cube D6 Dice (Vegas Style)

Recommend to print without support if your printer can if not only the hook should need supports

1/10 scale Accessories Pike Pole W/Hook

A bracket to alleviate the stresses found at the extremes of the build volume that bend and put pressure on the Bowden tube connectors causing shortened life of the part. Use a standard size Zip Tie (Zap Strap) to hold the Bowden tube in place.

No Supports needed.

Uses one screw from the front tower cover & one screw from the inner linear Z Bearing to attach to the mini.

Works on my MPSM Pro but should fit a V1 V2 or any After Market Extruders including the WK9

Monoprice Select Mini Bowden Relief v2

Bad Dudes Player 1

Bad Dudes Player 2

BAD DUDES Attack

Bad Dudes Jump

Important Information
At a 0.2 layer height you should have luck setting your gcode up with this info
PLA, & TPU
180°c @ Layer 1
185°c @ Layer 35
190°c @ Layer 70
195°c @ Layer 106
200°c @ Layer 140
205°c @ Layer 175
210°c @ Layer 210
215°c @ Layer 245

ABS, & PETG
220°c @ Layer 1
225°c @ Layer 35
230°c @ Layer 70
235°c @ Layer 106
240°c @ Layer 140
245°c @ Layer 175
250°c @ Layer 210
255°c @ Layer 245

A Faster Temp Tower ABS

A Faster Temp Tower TPU

A Faster Temp Tower PLA

A Faster Temp Tower PETG

tiktok.com/@az_kevin
Come Watch My Printer!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

kevinjohnsanders