This is a must-have for every printer owner Bambu LAB P1P and other Bambu LAB models. Foldable filament spool holder with spring hinge consisting of three parts .Download, you will not regret it !!!

This item is for use with the #GridFinity system by Zach Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8 This is a 4 unit wide by 1 unit deep by

Inspired by the quick change universal spool holder by Foreverwinter ( https://www.thingiverse.com/thing:1241566 ), I have created a spool holder mount that connects directly to Multiboard tiles. Ess

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4869263. 【Single Filament Spool Holder】 1kgフィラメント専用のスプールホルダーとなります。 本体サイズは164mm×85mm×42mmとなります。 65mm幅までのスプールに対応しているので大抵の1k

Based on Fred Boisselier design: https://www.printables.com/model/540699-creality-k1-max-side-load-spool-holder I added bigger and deeper screw holes and a mount for PTFE. You'll need one M3 0.5 x 12

This was designed to go on top of the Bambu Lab X1 Carbon in front of the AMS. I made it to hold all of the tools that the X1 Carbon Combo comes with out of the box plus a place for the pre-sliced sc

Explore the 3D model of the Creality K1 max glass lid and spool holder for printer enthusiasts and gaming hobbyists on Thangs.com. This innovative design ensures safety and ease by providing a secure

Embark on a transformative journey with this avant-garde 3D printable upgrade designed to elevate your Ender 3 3D printing experience. Unleash the potential of your creativity as you seamlessly naviga

Filament Spool Holder for the Ender 3 ** This spool holder is designed to always keep your filament firm. Simply adjust it to fit. It's pictured here being used on my enclosure from [enclosurelab.com]

This is a remix of https://www.printables.com/model/392964-gridfinity-bambu-lab-hotend-nozzle created by Luka Rasmussen on Printables. Also included is the lid by "ame" on Printables. https://www.prin

Why go to the hardware store? While sprucing up my studio I decided I needed a new shelf in the background of my shot. I could have bought cheap shelf brackets at the hardware store, but where i

#gridfinity spool holders. Thread your wire (or whatever) through the hole and just pull it out when you need it. I find this easier to print and use than spool holders with axles. Included are 2x3 b

Nozzle holders to store your Bambu A1 nozzles on your multiboard. Can be used with silicon socks in place. Nozzle size easily visible. v2 adds a small front lip and re

Fits ANY spool. Up to 1Kg as is (see photos), scale up for larger spools (see "Larger spools" section). Can be printed on a Mini 3D printer. Prints in one piece, pre-oriented, zero assembly. Option

#Gridfinity compatible holder for common 20mm thick 55mm diameter wire and solder spools. (actual internal dimensions are 56mm diameter, 21mm thickness).

Keeps the spool closest to the near end of the spool holder, improving filament draw and weight support. Shown in image is the 22mm version. For creality's hyper pla spool use the 26mm version. Test

Based on CHEP's design: https://thangs.com/designer/CHEP/3d-model/Creality%20K1%20Max%20Spool%20Holder-948987 Which is based on Fred Boisselier design: https://www.printables.com/model/540699-crealit

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6156033. This is a redisign of a cable spool holder organizer. It is a better design - you can more easily turn.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5253432. Watch me assemble it here: https://www.instagram.com/reel/CZurb91lTCE/?utm_source=ig_web_copy_link Anti-tangle

Push fit holder for 5x 'regular' 56x19mm sewing spools

Update IV 12-31-23: Corrected the size of the central spindle hole on all versions to match the Bambu Lab original STLs. Current versions are V3 and V7. The slightly increased diameter allows my

Designed for the 10 kg AzureFilm spool (230mm thick x 300mm diameter). No additional parts requred. Video https://youtube.com/shorts/iIYbpCjPMmY?feature=share Printing Parts are pre-oriented and

This simple spool holder is made to sit beside your 3D printer so that you do not need to rely on the original spool holder the printer comes with. It is meant for most (inner hole of spool must be 43

wall mounted 5kg spool holder

Modular Wire Spool Holder that is 100% printable with no fasteners required. It's designed for standard wire reels with a 20mm width and up to 60mm / 25.5mm diameter and will hold them out of the box.

Created a Reprack compatible mount for the Filler - Filament Holder. I've used the following parts of th

Description Bestagon the Hexagonal Spool holder This spool holder can be printed without supports, requires 0 screws and only needs either 4 608 bearings or 629 bearings: Print Instructions: C

I recently printed this riser for the AMS on my Bambu X1C. I wasn't a huge fan of having to pull the

Pre Painted and ready to go! How Original! To sell physical prints subscribe to thangs memberships!

Gridfinity Bambu Liquid Glue Holder 1x1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4888950. Remixed side spool holder to include locking twist tabs and lip on mount for better retention to rail. More deta

Short filament spool holder with 6000Z bearings. For 1kg spools. Top mount. For this spool holder I used, M10x100 Screw and M10 Nut but I recommend to use M10 Nylon Lock Nut instead normal nut. M

Gridfinity Soldering Spool Holder for 500 grms spools. No bearings required.

extend ender 3 and ender 3 v2 side spool holder by 60mm

_Custom easy to print Filament Spool Holder/storage Arm to mount to any wall or in drying cabinet as shown. Recessed mounting holes for wood/drywall screws and holds 2 Spools that will be offset in he

This model is designed to make storing and using your filament rolls easier if you print from the Bambu Labs AMS. It ought to work for any printer where you print from a dry box with rollers, however

Gridfinity Bambu Glue Stick Holder 1x1

Use this to adapt your Sunlu 1Kg filament spools to the Bambu Labs A1 AMS system.

Designed for you to put the spool holder that came with the MK3S on your IKEA LACK enclosure for more flexibility! Buy me a coffee :) - [Printables](https://w

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5957346. Useful print, redrawn to be more angular and simple to print with no supports. Just slice it oriented so the int

Ever notice that your Elegoo Neptune series 3 or 4 printers have threads for a second spool of filament? I did. Sure there are other filament spool holder files available for these machines, but I'm

A low profile - 2 mm clearance to bottom for 200 mm spools. Requires 4x standard 608 bearings. Included FreeCAD model has parameters that should be adjustable for different sized spools. This was in

End bracket for simple spool holder/rack. Print 2 without support. Use two pieces ¾" PVC pipe: https://a.co/3kMfGNA

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4618632. WORK IN PROGRESS>>>> I wanted a replacement Spool Holder that mounted from the rails in the frame but could b

This spool holder is designed for printers that have a 2020 T-Slot Profile aluminum extrusion frame along the top. The holder is slightly angled so the filament spools off to the side and around the p

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4411634. Remix of 2020 Spool Holder - Top mount (with or without bearings) by BADcreations Increased height to 1300mm

#Gridfinity wire spool holder for a bunch of crappy spools that I grabbed off amazon for cheap. Find more up to date models and work in progress ideas at https://git.mautobu.com/Justin/things/

i recommend 100% infill you can see how to assemble it here https://www.tiktok.com/@emxperformance/video/7201102081061620998?is_from_webapp=1&sender_device=pc&web_id=7170046747439695365

Introducing the Ender-3 V2 Printer Spool Holder Integration Kit – a description so creatively crafted that it might just break the mold (or at least put a grin on your face). We're talking about a nif

This is a mini spool that you can print to make a cute penholder! You can easily print 3 parts in different colors to make it look like a real filament spool! I also have an [Instagram](https://www.