A small bath to clean linear rails in degreaser or isopropyl alcohol. Always wash new linear rails. A small bath to wash your linear rails in degreaser or isopropyl alcohol. You should always wash new linear rails to remove any anti-rust or dried grease on the rails.

Fits 150mm MGN7 rails typically fitted to Voron 0.1 3D printers.

Put rail in the bath, add IPA, then slide the carriage back and forth 10 times. It's amazing how smooth rails are afterwards.

You can see it in action on YouTube https://youtu.be/L8nmWSs23eQ

Be careful taking the rail out of the bath, the carriage can now very easily slide off the end of the rail.

Small funnel STL file also attached to assist with disposing of cleaning solution.

I printed in PETG.

You can also scale this model in the slicer to use with larger linear rails.