Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3947324.

This thing is a mount for the FYSETC 12864Mini LCD, to mount it to the Anycubic Kossel Linear Plus. This should work on any delta printer made with 2020 extrusions set 20mm apart with a 6mm slot (typically 6.15mm+). Use a pair of M5 button-head screws to mount it using a nut type of choice for your extrusion. Smaller screws will work with washers as the mount has guides to align it tightly with the extrusions. The display drops in easily, but fits snugly (very little play) if your printer is well dialed in. Use M3 button-head screws to secure the display in place (if you wish, may not be necessary). The holes are 2.8mm, so an M3 screw should form threads in it as you screw it in (be slow and deliberate, it will form threads). PETG works very easily. PLA requires a little more effort, but will cut threads into it if you use a bit of pressure and are steady. The cover is designed to snap onto the base of the mount.