Keeps your food and other stuff out of the water in the bottom of your ice chest. This is printed upside down. In the ice chest you want the gaps at the bottom to allow water to flow through.

Ice Chest Riser

100x100ICR.stl

I got tired of my keystone popping out so I made this for D type Panel Mounts. This is remixed from the original right rear keystone skirt from the Voron 2.4

Voron 2.4 Right Rear Skirt D Panel Mount

VORON_2.4_Right_Rear_Skirt_D_Panel_Mount.step

Modified Voron 2.4 Front B Skirt to house switches for the individual power supplies. Inserts Remixed from original Voron mod located: https://mods.vorondesign.com/detail/hzAuKuHXidFoWPHzK791xg

UXCell Switches
Red Switch
https://www.amazon.com/uxcell-Backlit-Terminal-Position-Button/dp/B071KTQ2F5

Green Switch
https://www.amazon.com/uxcell-Illuminated-Terminal-Position-Button/dp/B072NZ66B2

Voron 2.4 Front B Skirt with Switches

Front_Skirt_B_300_Uxcell_Switches.stl

Umbilical mount for the Voron 2.4 R2 that allows the completion of the umbilical run through the final cable chain segment. The 2 slots are for zip ties to secure the umbilical. Remixed from the original [a]_cable_cover.stl available on the Voron github repo.

Voron 2.4 r2 A Motor Umbilical Mount

Umbilical mount for the Voron 2.4 R2 that allows the completion of the umbilical run through the final cable chain segment. The 2 slots are for zip ties to secure the umbilical.

Version 2 of the mount for my custom umbilical for the Voron Stealthburner with CW2.  This one has not been tested, but it still faces one of the original issues, the hole is too small for the plug end on my Mellow Fly SB2040. This may work for someone though... I am working on version 3 Remixed from the original chain_anchor_2hole_SW.stl available on the Voron github repo.

Stealthburner Umbilical Mount

A mount for my custom umbilical for the Voron Stealthburner with CW2.  The 2 slots are for zip ties to secure the umbilical. Remixed from the original chain anchor.
https://github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2/chain_anchor_2hole_SW.stl

Ender 3 Mount v2. Integrated glass bed mount. Modified the gantry clip to account for added thickness.

FYSETC - PIS - Ender 3 Mount v2

FYSETC - PIS - Ender 3 Mount With Glass Bed Clip.stl

FYSETC Portable Input Shaper Mount for the Ender 3. The clip was designed for use with the CR-Touch mounted. Use the M3x40 screw that came with the PIS to join the Mount and the Clip. The mount has a bit more clearance than I would like so maybe a dab of hot glue to hold it in place while performing the tests. 

FYSETC - PIS - ENDER 3 - Mount

FYSETC - PIS - Ender 3 Mount.stl

Blocky model of the FYSETC Portable Input Shaper for case / mount design. 
[Link](https://www.fysetc.com/products/fysetc-portable-input-shaper-with-rp2040-upgraded-3d-printer-parts-support-klipper-for-voron-2-4-0-1-trident?variant=41865925001391)

FYSETC-PIS-Blocky.stl

Blocky model of the FYSETC Portable Input Shaper for case / mount design

5V Labeled Insert.stl

24V Labeled Insert.stl

Blank Insert.stl

Insert Lock.stl

RRS_D_PANEL_MOUNTVORON_2.4_Right_Rear_Skirt_D_Panel_Mount.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

INeFFeCTiVE

Pinned models

Stealthburner Umbilical Mount

Voron 2.4 Front B Skirt with Switches

Voron 2.4 Right Rear Skirt D Panel Mount

Ice Chest Riser

Voron 2.4 Right Rear Skirt D Panel Mount

Voron 2.4 Front B Skirt with Switches

Voron 2.4 r2 A Motor Umbilical Mount

Stealthburner Umbilical Mount

FYSETC - PIS - Ender 3 Mount v2

FYSETC - PIS - ENDER 3 - Mount

FYSETC-PIS-Blocky.stl