Voron 0.1 Magnetic Bed Guides
113 downloads · 5 years ago · A simple clip-on magnetic bed alignment solution for the Voron 0.1.
I always seem to fiddle about t
This model is restricted by licensing terms.
View license.
A simple clip-on magnetic bed alignment solution for the Voron 0.1.
I always seem to fiddle about trying to get the magnetic bed to align with the magnet, and designed this solution.
It simply clips over the M3 Locknuts on the underside of the bed and slides in from the side.
Should also work on the original Voron 0.
Added version 2 which is 0.5mm longer and makes it easier to locate the magnetic bed.
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4933831.
Voron 0.1 Magnetic Bed Guides
113 downloads · 5 years ago in and
This model is restricted by licensing terms.
View license.
Tronxy X5SA magnetic bed plate guide
Voron 0.1 Mini-Afterburner Cowling Logo
Kirigami Bed Front - Voron V0 & V0.1 Mod
Magnetic PTFE Guide
Voron 0.1 Hardware Organizer
Voron 0.1 with MAB Dial Indicator Mount
Voron 0.1 XY joint cracking fix
M2 T-Nut - use for Voron 0.1 Makerbeam XL 1515 Extrusion
Voron 0.1 Tophat Riser
Voron 0.1 Cable & Bowden Strain Relief
Mariner Mercury 50 60 flywheel magnet gluing guide
Voron Drag Chain Guide Rework
Cable Channel for Voron v0.1 Kirigami bed
Magnetic Glass Print Bed Holder Tabs
Aesop Rock - Spirit World Field Guide - Wall art / Magnets
.png&w=3840&q=75)
Weight Plate Magnet Set (with customization guide)
Kinematic Bed Mount Coupling With Magnetic Preload for SolidCore 3D Printer
Voron 2.4 Berd Air Drill Guide
Voron 0.2r1 Bowden Umbilical Guide
doesnt it deform, when you print ABS, with the bed being over 100°C?
I was considering this and would only do it when printing with PLA. ABS will deform at around 105c so a print bed for ABS is 100, that's what temp I head the bed to. So, for PLA with a bed at 60-70 we should be OK, but I would not want it deforming and clinging to the bed especially on long ABS prints. Not that the small Vorons print for countless house. I do mostly use my VORON 2.4 machines but there is a bed guide on it so I don't need to print anything like this. Cheers.