The original XY joints of [Voron 0.1](https://github.com/VoronDesign/Voron-0) tends to crack along the layer lines when tightening the flat head screws.
This fix enlarged the countersink holes so the screw head can be flush.

Voron 0.1 XY joint cracking fix

XY_Joint_Left_Lower_x1_fix_cracking.stl

XY_Joint_Left_Lower_x1_fix_cracking.step

XY_Joint_Right_Lower_x1_fix_cracking.step

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4888214.

### Voron M4 with PC4-01 Bowden Connectors

This is a remix of the beautifully designed [Voron M4](https://vorondesign.com/voron_m4) extruder.

Since the bowden collet in the original design is a little bit hard to source, I've adjusted the size of the hole to fit a more common PC4-01 connector.
Assemble as the original design and screw the connector directly into the printed parts. The fitness may vary from different printers but mine fits tightly (still need to test how long can it last).

### Parts needed

Only the main_body and end_plate are modified, and the mirrored version is also included. The other parts and the documents can be downloaded from the [voron design github](https://github.com/VoronDesign/Mobius-Extruder).

### Print Settings
The same as the printing guidelines in the voron document (ABS, 4 perimeters with 40% infill). 


Voron M4 with PC4-01 Bowden Connectors

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4786693.

Made to mount my Raspberry Pi 4 with a heat sink onto an SSD.
It can also work without the heat sink (or with other cases that have the M2.5 mounting holes available).

Materials needed:
4 M3 screws for the SSD
4 M2.5 screws and nuts for the RPi (or the screws that came with the heat sink)

Designed with Onshape and here is the link for the document:
https://cad.onshape.com/documents/4fb0b117c46b1da221f90aec/w/412f5ccbf00fc3e28ff3a7c9/e/42b29afcfab18d313d0ae016

Raspberry Pi mount for SSD

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4901811.

Remixed from https://www.thingiverse.com/thing:4740831


A simple print-in-place bag clip remix.
Made the clips open at 15 degrees so they are printable on small-sized printer while keeping the two parts from sticking together.

------

Print with 3 perimeter for better strength.
 
Tested with ABS. 
PETG might also work. Not sure about PLA.

Remix of Bag Clip / Sealing Clips without overhang & support

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nhchiu

Achievements

Seedling

Explorer

Voron 0.1 XY joint cracking fix

Voron M4 with PC4-01 Bowden Connectors

Raspberry Pi mount for SSD

Remix of Bag Clip / Sealing Clips without overhang & support