Open belt keeper clip in 6 sizes. Keeps loose belt straps in place without removing the belt. Fast print, no supports required.

Open Belt Keeper Clip | 6 Sizes (35–50 mm) Tired of loose belt straps?

After losing weight, I had to tighten my belt more and more. Eventually, the loose belt end no longer stayed in place because it sat between the belt loops of my jeans.

Most available belt keepers are completely closed, meaning you have to remove the belt before installing them.

So I designed an open belt keeper clip that can be attached, repositioned or removed without taking off the belt.

Simply slide the long side behind the belt, snap the short hook into place and insert the loose belt strap.

Features

• Installs without removing the belt
• No supports required
• Fast print (~17 minutes)
• Only ~2.24 g of filament
• Easy to reposition
• Available in six practical sizes

Print Settings

• Material: PETG
• Nozzle: 0.4 mm
• Layer Height: 0.20 mm
• Supports: None

Included Sizes Variant Internal Size Suit 35 × 7.6 mm Jeans 41 × 9 mm Standard 41 × 11 mm Large 43 × 14 mm Wide Belt 45 × 17 mm Workwear 50 × 17 mm License

This model is licensed under CC BY-NC-SA 4.0.

You are free to print, share and remix this model for non-commercial purposes, provided that proper attribution is given and derivative works are released under the same license.

Happy printing! 😄