Piggy Bank in 3 sizes that can hold one coin with satisfying click sound

Based on my Piggy and Boar

If you want to sell prints of this models you can buy a Commercial license (for life) Check a LinkTree in my bio Or join my Commercial Plan where you can sell prints of all of my models on Thangs

Sizes Small: for coins up to 18mm diameter and 2.45mm thickness Medium: 22,5mm x 2.95mm Big: 27,5mm x 3.45mm

Tested with all Polish coins (including one special, bigger) Prepared for all Euro coins + some additional space for even bigger coins If needed you can resize the models for different coins

Piggy is with internal springs that will hold the coin First time after a print it may be harder to push the coin in

Printing tips

Made for 0.4mm nozzle (spring is 0.8mm thick)

There are some bridges but they are pretty short so it shouldn't be hard to print

Print with 2-3 walls 0.1-0.2mm layer height Some infill may be usefull (7-10%)

Multicolor To print in multicolor select a model and 2 (or 3 when printing a boar) multi files and drop all of this in your slicer Merge models together and select colors for each Multi files are with frames that will not be printer. Ignore model 'errors'

Body: Pink / Brown (boar) Smile: Red / white Eyes: Dark Fangs (boar): White / bone