Low-poly model of a Fox as a

• Toy
• Decoration
• Phone stand
• Keyring

If you want to sell prints of this models you can buy a Commercial license (for life) Check a LinkTree in my bio Or join my Commercial Plan where you can sell prints of all of my models on Thangs

A Fox can be printed as it is or with holes as eyes where you need to put a 1.75mm filament as eyes - you can also leave it with holes

To make holes add Fox_Eyes-cut_Negative-Volume as a negative volume (right click on base model) Around 7mm of filament is needed. I put a longer string inside and then cut off the rest (carefully to not damage the model or yourself). If you want to install already cutted filament cut it with around 60dgr angle for best look Pliers may be usefull to help installing the filament

Model is with a full body or with space for a phone (8-16mm - as in file names and on the bottom of models) Phone will be at 12 dgr angle. Should work with horizontal and vertical placing

To make a Keyring select a model file of your choice and a Fox_Keyring-Addon and drop them in slicer Models should be merged together After merging you can easly resize or rotate the model if needed

Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - Ignore model 'errors' and DO NOT try to 'fix' the model

Printed with 0.4mm nozzle 0.1-0.2mm layer height 2-3 walls NO supports needed 7% gyroic infill