Set of Piggy and Boar models Version 2026

Standing versions with optional props (antlers, beanie, ghost, helmet, santa, trousers) with Keyring, earrings

Laying versions as phone stands with Keyring addon

Printable in 2-3 colors without automatic filament change (filament strings as eyes or fangs) Additional files for easy multicolor prints

If you want to sell prints of this models you can buy a Commercial license (for life) Check a LinkTree in my bio Or join my Commercial Plan where you can sell prints of all of my models on Thangs

Standing Piggy and Boar are 4cm high Keyring version is 75% size Earring is 45% size

PROPS Props are made only for a standing Piggy and Boar

• Antlers
• Beanie and a scarf (beanie can be printed with 2-3 colors with a pause)
• Ghost (will hold Piggie, squeeze a ghost sides to release Piggy)
• Helmet with a visor
• Santa hat and a beard (print hat with a pause to change color)
• Trousers (print it with elastic filament, like TPU)

You can see the use of props on video https://www.instagram.com/p/DXrDR2ujTwv/

PHONE STAND Phone stands are for 8-16mm phone thickness (as in file names and on the bottom of the models) Resize for different phone size or for more stability (like 10mm resized to 160% for 16mm phone will be more stable than 16mm model version)

Phone will be at 12dgr angle. The bigger the difference between the model size and phone size the highier angle so it will be less stable

PHONE_0 is a solid model without any space for a phone Use as a toy or decoration

Piggy is my first model for 3D printing and a second model printed ever (after test print) First version was made in Feb 2019 - it is on the last photo There was some improvements made over the years but now, in 2026, I completely remede the models It's looking better, is easier to print and with much nicer props

Made in Blender 3D

No supports needed No infill needed but it is recommended (will strenghten the print) 0.1-0.2mm layer height 2 walls or more Made for 0.4mm nozzle - you can use smaller for better quality of earrings or keyrings

For smaller kids (2-4yo) print with at least 3 walls and with something stronger than PLA

If your cooling fan blows cool air only from sides you should rotate the model by 90 dgr to have a better cooling for a front and back of the model

Phone stand KEYRING To add a keyring to a phone stand model select both files (eg. PiggyV15-Boar_PHONE_0 and PiggyV15-Boar_PHONE_ADDON_Keyring) and drop them in the slicer Merge models before printing Ignore model errors. They are with a rectangle around the model to help you position the model right - it will not be printed or affect the model look

HOLES You can use filament strings to work as eyes and fangs Add a model of your choice (eg. PiggyV15), then right-click on it and add a negative volume model (eg. Eyes) Model will print with holes where you can put some filament and cut the rest with pliers Eyes should be cut streight. Fangs looks good when cutted with same angle as snout ('nose') You can then use a small torch to gently heat the ends to smooth it and get rid of white mark after a cut - don't overheat whole model! Ignore model errors. They are with a rectangle around the model to help you position the model right - it will not be printed or affect the model look

MULTICOLOR For a multicolor print select base file (eg. PiggyV15_PHONE_12mm) and all of multicolor files for this model (eyes, smile) Then drop them all at once to the slicer and click YES if asked to merge it (or merge it by yourself) Select a color for each part and you are ready to print Ignore model errors. They are with a rectangle around the model to help you position the model right - it will not be printed or affect the model look

Props can be printed with few colors without automatic filament change Pause on the right spot (you can add a pause in slicer in layer view) and change the filament