Variants available on dayviedesigns.com See the downloads section

Printing Instructions: The lamp shade is a two part 3mf (Cholla-Lamp_D) to use separate settings. The adapter part inside requires support and infill. The outer lamp shade can be printed with no support and no infill for speed. A brim is recommended. Parts should be printed with these separate settings but together as one print.

Thin walls on the lamp shade print best by forcing two perimeters in the slicer. Minimum perimeter width: 0.2mm (for a 0.4mm nozzle)

The collet (Cholla_Collet-W50_V22) can be printed with standard settings with supports

Materials: The best light effects come from using translucent plastics. Opaque materials still work but light colors that allow light through look great and take on the color of the bulb used. Natural ASA, PLA, or PC have no pigments in them and allow some light through while looking mostly off white. The photos show models printed with Polymaker Natural ASA

This wooden base is the only base verified to work with this assembly, custom adapters can be made by swapping the inner part of the two part shade. Base: https://amzn.to/4vVsKNN Philips Hue: https://amzn.to/4cSjQJa As an Amazon Associate I earn from qualifying purchases

The 10" table lamp combines a custom 3D-printed shade with a plug-in E26 tabletop base to create a warm decorative accent for desks, shelves, and bedside tables. The translucent lattice shade diffuses light while highlighting the sculptural form of the piece itself.

Designed as an accent light for bedrooms, living spaces, desks, and shelves.

The shade is printed in premium ASA plastic, a translucent off-white material that takes on the color temperature and tone of the bulb used. The lamp is shown in the photos with a Philips Hue Essential Smart LED A19 bulb (800 lumen, dimmable), but any standard E26 or E27 A19 bulb should be compatible. Brightness and color will depend on the bulb selected. For softer ambient lighting, a dimmable smart bulb is recommended, with dimming controlled by the bulb.

Dimensions: 10" H x 6" W x 6" D

Base details: Standard E26/E27 and A19 socket, inline switch, 110V plug-in cord, 6 ft cord length.

Variant D4 - Other variants available for purchase and download on my website: dayviedesigns.com