This 10 inch server rack plate was designed for building Raspberry Pi5 NAS servers, it securely holds five SSD units, optimizing storage density in a compact 5U by 2U form factor compatible with standard home lab racks.

Ideal for RAID configurations using 4 disks plus a 5th as a dedicated backup disk.

The plate provides dual D-Type connector layout for HDMI and USB-C Power

Featuring slider caddy trays, it allows easy hot swapping to reduce downtime and streamline maintenance in professional IT environments.

Please note, this rack plate requires purchasing five SATA 22-pin male to female adapters separately to connect your SSDs, 2 M3x75mm screws, 4 M3x10mm screws and 2 M3x3mm screws.

This model is part of the Ocktron lineup, it mounts in our 10-inch Mini Home Lab Rack.

3D Print Profile:

• PETG: for structural strength.
• Layer height: 0.2 mm
• Print speed: use standard for optimum results, or 40–60 mm/s (slower for fine details).
• Wall loops: 4 layers for optimal outer strength.
• Top layers: 5.
• Bottom layers: 3.
• Infill: 20% for optimal quality/strength of the pieces.
• Material support: yes
• Brim: not required.

BOM:

• 5 x SATA 22-pin male to female adapter to connect your SSDs
• 1 x D-Type HDMI Panel Mount Pass Though Adapter
• 1 x D-Type Module USB C Pass Through Connector
• 2 x M3x75mm screws
• 4 x M3x10mm screws
• 2 x M3x3mm screws
• 4 x #6 3/4 inches self tapping screws (American standard), or M4x16mm self tapping screws (Metric standard)

For more assembly details please refer to the video in the gallery.