Experience a tweaked digital electronics hobby with the 3D model of Raspberry Pi5 NAS 10-inch server rack plate designed by Carlos Byte on thangs.com. This server rack plate is designed to securely hold two SSD units, optimizing storage density in its compact 5U by 1U form factor. It's the perfect match for standard home lab racks and ideal for RAID 0 or RAID 1 configurations. The model also accommodates a dual D-Type connector layout, designed specifically for HDMI and USB-C Power. The significant feature of this model is the slider caddy trays fostering easy hot swaps, bridging the gap between downtime and maintenance in professional IT environments. This model is part of the Ocktron lineup and comfortably fits in our 10-inch Mini Home Lab Rack.

3D Print Profile: PETG: for structural strength. Layer height: 0.2 mm Print speed: use standard for optimum results, or 40–60 mm/s (slower for fine details). Wall loops: 4 layers for optimal outer strength. Top layers: 5. Bottom layers: 3. Infill: 20% for optimal quality/strength of the pieces. Material support: yes Brim: not required.

BOM:

• 2 x SATA 22-pin male to female adapter to connect your SSDs
• 1 x D-Type HDMI Panel Mount Pass Though Adapter
• 1 x D-Type Module USB C Pass Through Connector
• 2 x M3x30mm screws
• 4 x M3x10mm screws
• 2 x M3x3mm screws
• 4 x #6 3/4 inches self tapping screws (American standard), or M4x16mm self tapping screws (Metric standard)

For more assembly details please refer to the video in the gallery.