Updates

25. Jan 2024 - 3 new sizes available! Want the beautiful organic look of voronoi AND the functionality of a twist-to-open box - then print this! Can be used as a bowl, stand or open container OR as a closed box - just twist to change!

Overview

The model consists of 2 parts - ‘Box’ and ‘Voronoi Lid’. They come in multiple sizes. You can print the smallest one to test it out, before printing a bigger one :-)

It comes in the following sizes:

• Tiny (Dia: 30 - Height: 30 - great for testing it out)
• Mini (Dia: 35 - Height: 35)
• Small (Dia: 61 - Height: 40)
• Medium (Dia: 81 - Height: 50)
• Large (Dia: 113 - Height: 70) Follow for more to come!

Assembly

That’s easy - print box + lid, and screw them together. It might be a little tough to screw together in first try depending on the print quality - but repeat some times to help. And maybe clean the voronoi lid on sharp edges.

Print instructions

The Box is simple to print. But there is one tip:

• Supports: No - not needed. (But the box has some bridging to make the handle on the bottom - printed just fine on my Bambu Lab P1S without supports)

Regarding the Voronoi Lid is a few tips here:

• Supports: Yes - tree supports. (To support the different angles of the patterns. Requires some clean-up afterwards)
• Speed: Low-medium (Depending on the printer, maybe slow it down, to keep the small areas stable while printing)
• Orientation: The models are oriented in the correct print position

Happy printing!