PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION 🩹🦠💉💊

As promised, we have an expansion of yesterday's Feverish Freebie pack which includes a few bandages, syringes, and viruses with addition bases and faces - AND an additional SURPRISE DESIGN (Hint: the emojis might give it away 🤫) I am especially excited about the little viruses! I never thought I'd consider a virus cute, but I am soooo happy with how these turned out! Hope you all have some fun with these too! 🩹🦠💉💊

This pack contains 5 unique base designs and 21 cap designs (+ a surprise 1 base and 8 caps). Caps are offered as raised variants where able. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Tan - Kingroon Skin PLA
• Pink - Kingroon Pink PLA
• Green - Kingroon Green PLA
• Light Blue - iSanmate PLA+ Matte Blue
• Dark Blue - Kingroon blue PLA
• White - Kingroon White PLA
• Black - Kingroon Black PLA

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Eyes, Mouth, Etc)
• Medium Detail (Mask, Shapes)
• Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com