What if gridfinity were a multitool? Now you can build your own custom pocket tool! Assembles with NO hardware and NO glue needed. Quickly swap out toolsets on the fly, design your own tools for infinite possibilities!

Includes:

• Bit driver tool (optional magnet)
• 2-bit holder tool
• Shafts for slim or wide multitool (2 to 6 tools)
• Tool template to design your own compatible tools

To print: Works great with PLA, you may use a strong material for the shaft if desired. Print the shaft with 100% infill, "floating" up on support to avoid over-extrusion on the bottom. Check your first layer! If you have trouble fitting the shaft into the frame, carefully trim the opening of the frame with a knife. If it doesn't fit, you're probably printing too close to the plate.

To Assemble: Install a clip on the shaft, then slide the tool onto the clip, repeat. Then install the shaft into the frame.

If you enjoy my work, help me keep doing it by donating. If you can't donate please support me in other ways: leaving a like or comment or sharing my page. _ This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/_