PRIVATE USE ONLY⚠️

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files CANNOT be shared, remixed or sold in any way. A Commercial License is Required to legally sell physical prints of my designs. 👉HERE is a link to my commercial license options!

DESIGN DESCRIPTION🐍🥟

Hi again! Today's release came about from a request for some clickers resembling Lunar or Chinese New Year. This is a hodge-podge of designs that are relate the Chinese New Year Celebration, such as a Lion Dance Mask and some dumplings. As it is the year of the Snake, I obviously had to try my hand a snake clicker to go along with this pack! I can't say fitting a Snake on the clicker was the easiest of tasks, but I am happy how this pack ultimately turned out and hope you have some fun with it! 🐍🥟

⚠️Note: The Lion Mask has a lot of tiny details so make sure to print with the recommended print settings below 👇 for the best results! ⚠️

This pack contains 4 unique base shapes and 10 unique caps. Raised variants are offered where able. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

CLICKER INFORMATIONℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).

LICENSING⚠️

This is a PRIVATE USE ONLY license.

Commercial License options available 👉HERE

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is NOT ALLOWED.

PHOTO COLORS🎨

• Red - Hatchbox True Red PLA
• Yellow - Overture PLA Professional Light Yellow
• Green - Elegoo Neon Green
• Tan - PolyTerra Army Beige
• Pink - PolyTerra Sakura Pink

3D PRINT SETTINGS⚙️

Layer Height: 0.2mm (recommended) External Perimeter: 0.33mm (recommended) Only one wall on first layer: True ⚠️(Required for Lion Mask) Detect Thin Walls: True ⚠️(Required for Lions Mask) Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized) Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended)

Note: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

• Small Detail (Pupils, Tongue)
• Medium Detail (Eyes, Mouth)
• Everything Else (Base Colors)

I've also found hitting the print with a heat gun right before the main body color starts printing will eliminate any little strings that can cause blemishes on the final design. (flat designs ONLY)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

For model help or other questions, please contact us at support@pawpularprints.com