2D3D
Makes
Be the first to upload a Make
0 Likes0 DownloadsSeptember 9, 2024
This is a simple twisted vase. It can be printed in vase mode with a thick nozzle (using the simple_vase_full.stl file) or with common print settings similar to the ones below (using the simple_vase_full.stl file).
Recommended print settings:
- around 10% infill
- 2-3 walls (I used a 0.4mm nozzle)
- 0.8-1.2 mm top/bottom thickness
Categories:
0 Likes0 DownloadsSeptember 9, 2024
0 Likes0 DownloadsSeptember 9, 2024