Kitchen Faucet Organizer

Suporte.stl

Print-in-Place Bag Clip

Mola 100mm v10.stl

Customizable Soap Dish

Cima_Full.stl

Nut Bowl with Filter

Baixo.stl

"BlueFlux" Butterfly Knife Trainer

Blade-singlecolor.stl

Simple Tweezers

Pinça.stl

Square Basket with print-in-place handles

Cesta Quadrada.stl

Odie 2D

White+Black.stl

5-Gear Spinner

Center 1.stl

Round Basket with Handle

Cesta.stl

Print-in-Place Basket with Handles

Cesta de Molas-bbst.3mf

Evoker

Corpo.stl

Knife Drawer Organizer

Stand.stl

Clothespins Recycled

Mola.stl

Garlfield 2D

Orange.stl

Flip Blade "Raptor"

Handle_v2.stl

Butterfly Knifes Stand (6x)

Conector 1.stl

Domino

Domino.3mf

Geometric-shaped coaster plus holder

Line.stl

Ventors Gamble_v4.stl

Letter Train

Letra_@.stl

Decorative Basket #5

I had some fun playing around with geometry to design these beautiful baskets. Just take a look at the Bananas I added for scale!

I must warn you, though, this print is quite demanding. It involves numerous retractions, pushing your printer to its limits. But trust me, the end result is totally worth it!


Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 3
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: If you wish.


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Small Soap Dish

Top.stl

Soap Dish

Decorative Basket #4

I had some fun playing around with geometry to design these beautiful baskets. Just take a look at the Kiwis I added for scale!

I must warn you, though, this print is quite demanding. It involves numerous retractions, pushing your printer to its limits. But trust me, the end result is totally worth it!


Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 3
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: If you wish.


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Decorative Basket #3

Decorative Basket #2

Decorative Basket #1

Star Cup

Imagine six stars revolving around each other, leaving a beautiful trace behind, and presto! You have a Star Cup.

This print is a combination of usefulness and a bit of a torture test. It will put retractions and cooling to the test.

Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 3
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: If you wish.


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Heart Cup

Imagine six hearts revolving around each other, leaving a beautiful trace behind, and presto! You have a Heart Cup.

This print is a combination of usefulness and a bit of a torture test. It will put retractions and cooling to the test.

Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 3
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: If you wish.


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Naval Battle

Le Mans and Hypercars Decor

Calling all motorsports fans! Check out the iconic Le Mans track, where the legendary 24 Hours race takes place. And guess what? This year is extra special because it's the centennial celebration of the 24 Hours of Le Mans. I wish I could be there in person, but hey, I've found a way to bring the excitement to my walls! I've got the track layout and even the silhouettes  of the Hypercars competing this year. It's the perfect decor for any racing enthusiast. Let's rev up the adrenaline and celebrate this historic event!

Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: Yes


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Le Mans.stl

DNA Sample

Here it is, something that nobody thinks they want, but secretly needs... a DNA Sample ;)

Not only is it a beautiful sculpture, but it's also a perfect way to test your printer, as bridges can be quite challenging.

Hope you like it!

Print Settings: 
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 3
Supports: No
Brim: No
Raft: No
Supports: No
Change filament during print: Maybe?


Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Katana Butterfly

Blade.stl

Heart Tree

Filigrama v7.stl

Universal Calendar

Calendario.stl

Liquid Dispenser Collector

Those who know me and follow my posts have probably noticed that I like to start with a brief introduction. Not only does it add a personal touch, but I also believe that those on the other side have some interest in what inspired the creation of this or that object.

Perhaps we have something in common, right? Like... for example, those liquid soap dispensers with short tubes that are inefficient and always leave half of the product trapped inside the bottle? It drives me crazy... And it would be so easy to fix.

In this case, what I've done is create a piece that attaches to the end of the dispenser, allowing you to "scrape" the bottom of the bottle and extract every last drop of liquid.

It's a small and simple object that can be quickly and easily 3D printed.

I've included three sizes to accommodate different types of dispensers I have at home, but you may need to scale these objects to fit your specific dispenser. By maintaining the scale, the bottom openings and tube entrance will align perfectly.

I hope this little model proves to be useful in the fight against waste.

Print Settings:
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2 or 3
Supports: No
Change filament during print: Maybe
Pause during print: No
Brim: No
Raft: No

If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Raspa Fundo 6.stl

Dish Washing Sign

Sinal.stl

Column / Pedestal

Coluna.stl

Everspin Top

Everspin Top.stl

Zelda TotK Coaster

Coaster.stl

Kitchen Door Clip

I have a pretty small kitchen and after a renovation, we lost the spot where we used to hang our dish towels. After some family brainstorming, we came to the conclusion that we need a whole new house... lol. But in the meantime (which could take a few years), the best solution was to design these clips to attach the towels to the door handles. It works pretty well and it went from a temporary solution to a permanent one.

Just a heads up: these clips were designed to fit the doors and handles I have at home. To make it work in your house, you may need to make some adjustments in X, Y, and Z so the clip fits properly in your kitchen.

Oh, and I'd like to point out:
 - it's a quick print that doesn't use much filament.
 - I've been using them in my kitchen for about a year now and haven't had to replace them yet.

Print Settings:
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2 or 3
Supports: No
Change filament during print: If you wish
Pause during print: No
Brim: No
Raft: No

I hope you have fun with this model! If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Tube Container

Obelisk

Oblelisco.stl

Hourglass Fidget Toy

Ampulheta.stl

Pizza Slice

I gotta say, pizza is one of my all-time favorite foods. But my son? He's absolutely nuts about it. Like, we have to tell him "no" all the time and convince him to eat something else. One day, I thought I'd be funny and offered him this slice just to tease him (you know, dad jokes).

But now that I'm going through my stash of unpublished models, I think this slice is perfect for a remix. I'm dying to see what kind of toppings the community can come up with. So, I'm giving you a blank canvas to let your imagination run wild.

Let the remixing begin! :)

If you want to print it as is use th following print settings:

Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2 or 3
Change filament during print: Yes, red for tomato, yellow for cheese
Supports: No
Brim: No
Raft: No


ruimach

Achievements

Explorer

Sapling

Fan Favorite

Kitchen Sink Organizer