Introducing a 3D-printed soap dish designed for customization and functionality. It's a two-part design with a lower part to collect water and an upper part that holds the soap.

Design Features:

• The soap dish measures 130mm by 90mm.
• The upper part comes in several variations: a smooth one with four vertical holes, one filled with hexagonal holes, and a solid one designed to be printed with infill only.
• The infill-only version should be printed with 0 top and bottom shells, around 40% infill, and 0.6mm infill layer width.
• The upper part is available in two heights: 2mm and 4mm.

Printing Tips:

• No supports are needed for any of the parts.
• If you encounter first-layer adhesion issues, consider using a brim.

This soap dish design offers a variety of customization options, and I'm excited to see your remixes and how you make it your own.