tracking pixel
P

Case for wren keyboard

by
printprintprint
Follow
Follow
Remix Model
P
printprintprint
|
Image 3 of 4
Case for wren keyboard 3d model
P
printprintprint
|
Image 3 of 4
Case for wren keyboard 3d model
2D
3D
Makes
Case for wren keyboard 3d model
Case for wren keyboard 3d model
Case for wren keyboard 3d model
Case for wren keyboard 3d model

This is a very simple case for the wren keyboard. Basically it is a box with cut-outs for the connectors.

It improves the sound though an gives some protection.

To assemble I removed the bottom plate from the keyboard and screwed it to the case with the M2 / 8 screws that are use for building the keyboard.

Printed in rPLA by Recycling Fabrik Supports for the cutouts (might not be necessary) 0,2 layer height

You can find the keyboard here: https://github.com/oliviahanley/wren-keyboard. I only designed the case.


0 Likes0 DownloadsOctober 31, 2024



0 Likes0 DownloadsOctober 31, 2024

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density20 %
SupportsGrid