tracking pixel
Neil C

SteelSeries Microphone Wire Stabiliser.3mf

by
neilclack001
Follow
Follow
Remix Model
neilclack001
neilclack001
Image 1 of 5
SteelSeries Microphone Wire Stabiliser.3mf 3d model
2D
3D
Makes
SteelSeries Microphone Wire Stabiliser.3mf 3d model
SteelSeries Microphone Wire Stabiliser.3mf 3d model
SteelSeries Microphone Wire Stabiliser.3mf 3d model
SteelSeries Microphone Wire Stabiliser.3mf 3d model
SteelSeries Microphone Wire Stabiliser.3mf 3d model
This model is restricted by licensing terms. 
1 Likes2 DownloadsJune 7, 2023
This model is restricted by licensing terms. 


I have a SteelSeries Arctis 1 Wireless headset and my microphone started to break right at the 3.5mm jack.

This stabilizer presses onto the microphone wire with moderate friction fit and encases the entire joint between the wire and the jack, stabilizing the joint and preventing the break from getting any worse.

A single drop of superglue can be helpful if you're inclined to do so, but I don't use it as I'm afraid I'll update this model later and want the new version on my machine.

Print Tips:

Use .12 mm layer height .4 mm Nozzle PolyTerra PLA+ (My print) Use a brim User Arachne for the most accurate slicing Model is oriented in the correct print orientation, no supports required v


1 Likes2 DownloadsJune 7, 2023




This model is restricted by licensing terms. 
1 Likes2 DownloadsJune 7, 2023
This model is restricted by licensing terms.