Christian W
Christian W

Filters for Classic Lamp

by
milvetretired
milvetretired
Follow
milvetretired
milvetretired
|
Image 1 of 7
Filters for Classic Lamp 3d model
milvetretired
milvetretired
|
Image 1 of 7
Filters for Classic Lamp 3d model
2D
3D
Makes
Filters for Classic Lamp 3d model
Filters for Classic Lamp 3d model
Filters for Classic Lamp 3d model
Filters for Classic Lamp 3d model
Filters for Classic Lamp 3d model
Filters for Classic Lamp 3d model
Filters for Classic Lamp 3d model

Filters for Classic Lamp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3653019.

NOTE: DO NOT use incandescent bulbs with these filter. They will melt and deform.

I also did not screw down the top piece just in case I need access to the bulb. I instead used metal split dowels glued into the screw holes of the top piece so that they protrude about 1/4 inch. The dowels then fit loosely into the lamp when the top is put in place. 4 dowels are adequate.

After printing, let the bed cool before removing. If the bed is still hot, the filter will bend.

Metal dowels... https://www.amazon.com/gp/product/B01MEFBMG0/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

Short video of flicker lamp... http://my-3dprints.com/images/videos/Lamp.mp4


0 Likes0 DownloadsAugust 4, 2023
This model is restricted by licensing terms.