Modeled to mount a simple pin actuator micro limit switch flush with a surface. Designed for use with M3 bolts and nuts to affix the switch to the mount. #8 screws are used to affix the mount to the surface (in my case wood for a cabinet door switch to activate LED lighting). You may have to super glue the nut into the recess. 16mm is the minimum length of M3 bolt to use.
Photos are for the V-15-1C25 (simple pin actuator, vs a lever)
See V-15X-1C25 family of switches here: https://www.mouser.com/datasheet/2/307/en_v-1670758.pdf
V-15-1C25, V-156-1C25
Category:
3 Likes4 DownloadsAugust 9, 2021
3 Likes4 DownloadsAugust 9, 2021